Product Description
Introduction of Diesel Air Compressor Screw Air Compressor Industrial Air Compressor Machines Price
Feature 1: Environmental protection Accurate analysis of the internal airflow of the machine and proper use of the muffler board. The assembly of each component is controlled during the final assembly process to ensure low noise during operation. Even if the machine is placed near the work site or office, it will not cause uncomfortable reactions to the human body.Feature 2: Easy maintenance zmjt055Reasonable layout, humanized design, mature models. Whether it’s routine maintenance or troubleshooting, it’s easy to navigate.Feature three:When the rated pressure set by the machine is reached, the compressor is unloaded. When the system pressure is lower than the set value, the machine will immediately reload, and according to the actual gas consumption, intelligently select the appropriate automatic stop time after unloading to save energy, and ensure that when the system pressure is lower than the set value after shutdown The machine restarts immediately. Do not start up to more than hourly. The screw main unit sucks air in the low temperature zone to improve compression efficiency and reduce energy consumption.The product has been exported to the United States, France, Canada, Indonesia, Russia, Vietnam, Australia, South Korea, Iran and other countries, and has won unanimous praise from customers.zmwm02
Parameter of Diesel Air Compressor Screw Air Compressor Industrial Air Compressor Machines Price
| Model | Exhaust pressure (Mpa) |
Exhaust volume (m³/min) |
Power (kw) |
Noise (db) |
Weight (kg) |
Dimension (mm) |
Frequency converter weight(kg) |
Frequency converter size(mm) |
| BK7.5-8G | 0.8 | 1.2 | 7.5 | 72 | 200 | 800*620*800 | 200 | 800*620*800 |
| BK7.5-8 | 0.8 | 1.2 | 720*700*1000 | 200 | ||||
| BK7.5-10 | 1 | 1 | 200 | |||||
| BK7.5-13 | 1.3 | 0.8 | 200 | |||||
| BK11-8G | 0.8 | 1.7 | 11 | 72 | 300 | 1000*760*1090 | 300 | 1000*780*1090 |
| BK11-8 | 0.8 | 1.7 | 290 | 700*670*1250 | 300 | 805*720*1250 | ||
| BK11-10 | 1 | 1.5 | 300 | |||||
| BK11-13 | 1.3 | 1.2 | 300 | |||||
| BK15G | 0.8 | 2.4 | 15 | 73 | 280 | 1000*670*1090 | 300 | 1000*780*1090 |
| BK15-8 | 0.8 | 2.4 | 290 | 700*670*1250 | 300 | 805*720*1250 | ||
| BK15-10 | 1 | 2.2 | 300 | |||||
| BK15-13 | 1.3 | 1.7 | 300 | |||||
| BK18-8 | 0.8 | 3 | 18.5 | 74 | 500 | 1080*880*1235 | 560 | 1080*970*1235 |
| BK18-10 | 1 | 2.7 | 560 | |||||
| BK18-13 | 1.3 | 2.3 | 560 | |||||
| BK22-8G | 0.8 | 3.6 | 22 | 74 | 380 | 1200*800*1100 | 390 | 1200*800*1100 |
| BK22-8 | 0.8 | 3.6 | 540 | 1080*880*1235 | 600 | 1080*970*1235 | ||
| BK22-10 | 1 | 3.2 | 600 | |||||
| BK22-13 | 1.3 | 2.7 | 600 | |||||
| BK30-8 | 0.8 | 5 | 30 | 75 | 650 | 1120*930*1290 | 740 | 1120*1571*1290 |
| BK30-10 | 1 | 4.4 | 740 | |||||
| BK30-13 | 1.3 | 3.6 | 740 | |||||
| BK37-8G | 0.8 | 6 | 37 | 76 | 570 | 1340*850*1310 | 820 | 1340*850*1310 |
| BK37-8 | 0.8 | 6 | 730 | 1240*1030*1435 | 690 | 1240*1070*1435 | ||
| BK37-10 | 1 | 5.5 | 690 | |||||
| BK37-13 | 1.3 | 4.6 | 690 | |||||
| BK45-8G | 0.8 | 7.1 | 45 | 78 | 800 | 1480*1030*1345 | 1030 | 1480*1030*1345 |
| BK45-8 | 0.8 | 7.1 | 820 | 1240*1030*1595 | 880 | 1240*1095*1595 | ||
| BK45-10 | 1 | 6.5 | 880 | |||||
| BK45-13 | 1.3 | 5.6 | 880 | |||||
| BK55-8G | 0.8 | 10 | 55 | 80 | 800 | 1480*1030*1345 | 810 | 1480*1030*1345 |
| BK55-8 | 0.8 | 9.5 | 1200 | 1545*1200*1470 | 1270 | 1845*1200*1465 | ||
| BK55-10 | 1 | 8.5 | 1270 | |||||
| BK55-13 | 1.3 | 7.4 | 1270 | |||||
| BK75-8 | 0.8 | 13 | 75 | 81 | 1470 | 1800*1190*1710 | 1470 | 1800*1190*1710 |
| BK90-8 | 0.8 | 16 | 90 | 81 | 1520 | 1600 | ||
| BK110&WH-8 | 0.8 | 21 | 110 | 82 | 2000 | 2100*1230*1730 | 2150 | 2600*1310*1800 |
| BK110-8 | 0.8 | 21 | 2150 | |||||
| BK132&WH-8 | 0.8 | 24 | 132 | 82 | 2100 | 2270 | ||
| BK132-8 | 0.8 | 24 | 2270 |
Pictures of Diesel Air Compressor Screw Air Compressor Industrial Air Compressor Machines Price
| Lubrication Style: | Lubricated |
|---|---|
| Cooling System: | Air Cooling |
| Power Source: | AC Power |
| Cylinder Position: | Angular |
| Structure Type: | Closed Type |
| Installation Type: | Movable Type |
| Customization: |
Available
|
|
|---|
.webp)
What role do air dryers play in compressed air systems?
Air dryers play a crucial role in compressed air systems by removing moisture and contaminants from the compressed air. Compressed air, when generated, contains water vapor from the ambient air, which can condense and cause issues in the system and end-use applications. Here’s an overview of the role air dryers play in compressed air systems:
1. Moisture Removal:
Air dryers are primarily responsible for removing moisture from the compressed air. Moisture in compressed air can lead to problems such as corrosion in the system, damage to pneumatic tools and equipment, and compromised product quality in manufacturing processes. Air dryers utilize various techniques, such as refrigeration, adsorption, or membrane separation, to reduce the dew point of the compressed air and eliminate moisture.
2. Contaminant Removal:
In addition to moisture, compressed air can also contain contaminants like oil, dirt, and particles. Air dryers help in removing these contaminants to ensure clean and high-quality compressed air. Depending on the type of air dryer, additional filtration mechanisms may be incorporated to enhance the removal of oil, particulates, and other impurities from the compressed air stream.
3. Protection of Equipment and Processes:
By removing moisture and contaminants, air dryers help protect the downstream equipment and processes that rely on compressed air. Moisture and contaminants can negatively impact the performance, reliability, and lifespan of pneumatic tools, machinery, and instrumentation. Air dryers ensure that the compressed air supplied to these components is clean, dry, and free from harmful substances, minimizing the risk of damage and operational issues.
4. Improved Productivity and Efficiency:
Utilizing air dryers in compressed air systems can lead to improved productivity and efficiency. Dry and clean compressed air reduces the likelihood of equipment failures, downtime, and maintenance requirements. It also prevents issues such as clogging of air lines, malfunctioning of pneumatic components, and inconsistent performance of processes. By maintaining the quality of compressed air, air dryers contribute to uninterrupted operations, optimized productivity, and cost savings.
5. Compliance with Standards and Specifications:
Many industries and applications have specific standards and specifications for the quality of compressed air. Air dryers play a vital role in meeting these requirements by ensuring that the compressed air meets the desired quality standards. This is particularly important in industries such as food and beverage, pharmaceuticals, electronics, and automotive, where clean and dry compressed air is essential for product integrity, safety, and regulatory compliance.
By incorporating air dryers into compressed air systems, users can effectively control moisture and contaminants, protect equipment and processes, enhance productivity, and meet the necessary quality standards for their specific applications.
.webp)
How do you choose the right air compressor for woodworking?
Choosing the right air compressor for woodworking is essential to ensure efficient and effective operation of pneumatic tools and equipment. Here are some factors to consider when selecting an air compressor for woodworking:
1. Required Air Volume (CFM):
Determine the required air volume or cubic feet per minute (CFM) for your woodworking tools and equipment. Different tools have varying CFM requirements, so it is crucial to choose an air compressor that can deliver the required CFM to power your tools effectively. Make sure to consider the highest CFM requirement among the tools you’ll be using simultaneously.
2. Tank Size:
Consider the tank size of the air compressor. A larger tank allows for more stored air, which can be beneficial when using tools that require short bursts of high air volume. It helps maintain a consistent air supply and reduces the frequency of the compressor cycling on and off. However, if you have tools with continuous high CFM demands, a larger tank may not be as critical.
3. Maximum Pressure (PSI):
Check the maximum pressure (PSI) rating of the air compressor. Woodworking tools typically operate within a specific PSI range, so ensure that the compressor can provide the required pressure. It is advisable to choose an air compressor with a higher maximum PSI rating to accommodate any future tool upgrades or changes in your woodworking needs.
4. Noise Level:
Consider the noise level of the air compressor, especially if you’ll be using it in a residential or shared workspace. Some air compressors have noise-reducing features or are designed to operate quietly, making them more suitable for woodworking environments where noise control is important.
5. Portability:
Assess the portability requirements of your woodworking projects. If you need to move the air compressor frequently or work in different locations, a portable and lightweight compressor may be preferable. However, if the compressor will remain stationary in a workshop, a larger, stationary model might be more suitable.
6. Power Source:
Determine the power source available in your woodworking workspace. Air compressors can be powered by electricity or gasoline engines. If electricity is readily available, an electric compressor may be more convenient and cost-effective. Gasoline-powered compressors offer greater flexibility for remote or outdoor woodworking projects where electricity may not be accessible.
7. Quality and Reliability:
Choose an air compressor from a reputable manufacturer known for producing reliable and high-quality equipment. Read customer reviews and consider the warranty and after-sales support offered by the manufacturer to ensure long-term satisfaction and reliability.
8. Budget:
Consider your budget and balance it with the features and specifications required for your woodworking needs. While it’s important to invest in a reliable and suitable air compressor, there are options available at various price points to accommodate different budgets.
By considering these factors and evaluating your specific woodworking requirements, you can choose an air compressor that meets the demands of your tools, provides efficient performance, and enhances your woodworking experience.
.webp)
What are the safety considerations when operating an air compressor?
Operating an air compressor requires careful attention to safety to prevent accidents, injuries, and equipment damage. Here are some important safety considerations to keep in mind:
1. Read the Manual: Before operating an air compressor, thoroughly read and understand the manufacturer’s instruction manual. Familiarize yourself with the specific safety guidelines, recommended operating procedures, and any specific precautions or warnings provided by the manufacturer.
2. Proper Ventilation: Ensure that the area where the air compressor is operated has adequate ventilation. Compressed air can produce high levels of heat and exhaust gases. Good ventilation helps dissipate heat, prevent the buildup of fumes, and maintain a safe working environment.
3. Personal Protective Equipment (PPE): Always wear appropriate personal protective equipment, including safety glasses or goggles, hearing protection, and non-slip footwear. Depending on the task, additional PPE such as gloves, a dust mask, or a face shield may be necessary to protect against specific hazards.
4. Pressure Relief: Air compressors should be equipped with pressure relief valves or devices to prevent overpressurization. Ensure that these safety features are in place and functioning correctly. Regularly inspect and test the pressure relief mechanism to ensure its effectiveness.
5. Secure Connections: Use proper fittings, hoses, and couplings to ensure secure connections between the air compressor, air tools, and accessories. Inspect all connections before operation to avoid leaks or sudden hose disconnections, which can cause injuries or damage.
6. Inspect and Maintain: Regularly inspect the air compressor for any signs of damage, wear, or leaks. Ensure that all components, including hoses, fittings, and safety devices, are in good working condition. Follow the manufacturer’s recommended maintenance schedule to keep the compressor in optimal shape.
7. Electrical Safety: If the air compressor is electric-powered, take appropriate electrical safety precautions. Use grounded outlets and avoid using extension cords unless approved for the compressor’s power requirements. Protect electrical connections from moisture and avoid operating the compressor in wet or damp environments.
8. Safe Start-Up and Shut-Down: Properly start and shut down the air compressor following the manufacturer’s instructions. Ensure that all air valves are closed before starting the compressor and release all pressure before performing maintenance or repairs.
9. Training and Competence: Ensure that operators are adequately trained and competent in using the air compressor and associated tools. Provide training on safe operating procedures, hazard identification, and emergency response protocols.
10. Emergency Preparedness: Have a clear understanding of emergency procedures and how to respond to potential accidents or malfunctions. Know the location of emergency shut-off valves, fire extinguishers, and first aid kits.
By adhering to these safety considerations and implementing proper safety practices, the risk of accidents and injuries associated with operating an air compressor can be significantly reduced. Prioritizing safety promotes a secure and productive working environment.
editor by CX 2023-10-17
China factory Gardner Denver Gd Oil Lubricated Screw Air Compressor Variable Speed VSD 55kw FM55RS FM 55kw FM55RS-7A FM55RS-8A FM55RS-10A FM55RS-13A manufacturer
Product Description
Oil Lubricated Screw Compressors FM07RS-FM75RS Series Variable Speed VSD
Efficient Compact Reliable
FM Series small air compressors are designed to provide you with excellent quality main engines imported from Germany, with simple and convenient after-sales maintenance design.
Design philosophy focused on details
• Hard pipe connection for both hard and soft pipelines
• Materials such as Teflon increase the stability of the overall unit running
Efficient, stable, customizable according to specific needs
• FM07-22: TEFC, with standard IP55 rating
• FM30-75: ODP, with IP23 / IP54 ratings optional
• (IP 54 400V / 50Hz optional)
Filtering system
Efficient, high-quality, micro-oil air quality
• With nanometer filter materials, filter accuracy of up to 1μ
• Improve air quality, oil content less than 2 ppm
• New pre-filtration system reduces the air filter load
• Increase the operating life of the overall unit under complex conditions
Compact design, imported main engine, high efficiency and energy saving
• The direct drive by air end and motor of FM30-75 realizes efficient conversion of high CHINAMFG torque that protects the air end from the impact of external forces, thereby enabling more efficient and more stable operation.
• The whole series can reach national Level I, or Level II energy efficiency.
Technical Data for FM07RS-FM75RS Series Variable Speed VSD
| Model Number | Pressure(Bar) | Power(kW) | FAD1 (m3/min) | Noise Level² dB(A) | Drive | Weight (kG) | Dimensions L x W x H (mm) |
| FM07RS-7A | 7 | 7.5 | 0.45-1.13 | 70 | Belt | 225 | 667×630×1050 |
| FM07RS-8A | 8 | 7.5 | 0.46-0.98 | 70 | Belt | 225 | 667×630×1050 |
| FM07RS-10A | 10 | 7.5 | 0.43-0.95 | 70 | Belt | 225 | 667×630×1050 |
| FM07RS-13A | 13 | 7.5 | 0.45-0.77 | 70 | Belt | 225 | 667×630×1050 |
| FM11RS-7A | 7 | 11 | 0.58-1.53 | 70 | Belt | 234 | 667×630×1050 |
| FM11RS-8A | 8 | 11 | 0.52-1.41 | 70 | Belt | 234 | 667×630×1050 |
| FM11RS-10A | 10 | 11 | 0.51-1.39 | 70 | Belt | 234 | 667×630×1050 |
| FM11RS-13A | 13 | 11 | 0.49-1.07 | 70 | Belt | 234 | 667×630×1050 |
| FM15RS-7A | 7 | 15 | 1.06-2.64 | 73 | Belt | 360 | 787×698×1202 |
| FM15RS-8A | 8 | 15 | 1.01-2.46 | 73 | Belt | 360 | 787×698×1202 |
| FM15RS-10A | 10 | 15 | 0.95-2.2 | 73 | Belt | 360 | 787×698×1202 |
| FM15RS-13A | 13 | 15 | 0.89-1.73 | 73 | Belt | 360 | 787×698×1202 |
| FM18RS-7A | 7 | 18.5 | 1.37-3.15 | 74 | Belt | 380 | 787×698×1202 |
| FM18RS-8A | 8 | 18.5 | 1.35-2.96 | 74 | Belt | 380 | 787×698×1202 |
| FM18RS-10A | 10 | 18.5 | 1.29-2.66 | 74 | Belt | 380 | 787×698×1202 |
| FM18RS-13A | 13 | 18.5 | 1.31-2.25 | 74 | Belt | 380 | 787×698×1202 |
| FM22RS-7A | 7 | 22 | 1.35-3.49 | 74 | Belt | 395 | 787×698×1202 |
| FM22RS-8A | 8 | 22 | 1.05-3.23 | 74 | Belt | 395 | 787×698×1202 |
| FM22RS-10A | 10 | 22 | 0.94-3.05 | 74 | Belt | 395 | 787×698×1202 |
| FM22RS-13A | 13 | 22 | 0.98-2.59 | 74 | Belt | 395 | 787×698×1202 |
| FM30RS-7A | 7 | 30 | 1.88-5.26 | 72 | Direct | 750 | 1554×894×1505 |
| FM30RS-8A | 8 | 30 | 1.85-5.23 | 72 | Direct | 750 | 1554×894×1505 |
| FM30RS-10A | 10 | 30 | 1.81-4.52 | 72 | Direct | 750 | 1554×894×1505 |
| FM37RS-7A | 7 | 37 | 1.84-6.24 | 72 | Direct | 830 | 1554×894×1505 |
| FM37RS-8A | 8 | 37 | 1.84-6.21 | 72 | Direct | 830 | 1554×894×1505 |
| FM37RS-10A | 10 | 37 | 1.75-5.01 | 72 | Direct | 830 | 1554×894×1505 |
| FM45RS-7A | 7 | 45 | 2.83-7.57 | 76 | Direct | 900 | 1554×894×1505 |
| FM45RS-8A | 8 | 45 | 3.73-7.51 | 76 | Direct | 900 | 1554×894×1505 |
| FM45RS-10A | 10 | 45 | 2.25-6.12 | 76 | Direct | 900 | 1554×894×1505 |
| FM55RS-7A | 7 | 55 | 2.44-10.34 | 75 | Direct | 1170 | 2004×1179×1605 |
| FM55RS-8A | 8 | 55 | 2.37-10.07 | 75 | Direct | 1170 | 2004×1179×1605 |
| FM55RS-10A | 10 | 55 | 2.24-9.14 | 75 | Direct | 1170 | 2004×1179×1605 |
| FM75RS-7A | 7 | 75 | 1.82-13.5 | 78 | Direct | 1220 | 2004×1179×1605 |
| FM75RS-8A | 8 | 75 | 1.76-12.9 | 78 | Direct | 1220 | 2004×1179×1605 |
| FM75RS-10A | 10 | 75 | 1.65-11.91 | 78 | Direct | 1220 | 2004×1179×1605 |
| Lubrication Style: | Lubricated |
|---|---|
| Cooling System: | Air Cooling |
| Power Source: | AC Power |
| Cylinder Position: | Horizontal |
| Structure Type: | Closed Type |
| Installation Type: | Stationary Type |
| Customization: |
Available
|
|
|---|
.webp)
What are the advantages of using rotary vane compressors?
Rotary vane compressors offer several advantages that make them a popular choice for various applications. These compressors are widely used in industries where a reliable and efficient source of compressed air is required. Here are the advantages of using rotary vane compressors:
1. Compact and Lightweight:
Rotary vane compressors are typically compact and lightweight compared to other types of compressors. Their compact design makes them suitable for installations where space is limited, such as in small workshops or mobile applications. The lightweight nature of these compressors allows for easy transportation and maneuverability.
2. High Efficiency:
Rotary vane compressors are known for their high efficiency. The design of the vanes and the compression chamber allows for smooth and continuous compression, resulting in minimal energy losses. This efficiency translates into lower energy consumption and reduced operating costs over time.
3. Quiet Operation:
Rotary vane compressors operate with relatively low noise levels. The design of the compressor, including the use of vibration damping materials and sound insulation, helps to minimize noise and vibrations during operation. This makes rotary vane compressors suitable for applications where noise reduction is important, such as in indoor environments or noise-sensitive areas.
4. Oil Lubrication:
Many rotary vane compressors utilize oil lubrication, which provides several benefits. The oil lubrication helps to reduce wear and friction between the moving parts, resulting in extended compressor life and improved reliability. It also contributes to better sealing and improved efficiency by minimizing internal leakage.
5. Versatile Applications:
Rotary vane compressors are versatile and can be used in a wide range of applications. They are suitable for both industrial and commercial applications, including automotive workshops, small manufacturing facilities, dental offices, laboratories, and more. They can handle various compressed air requirements, from light-duty tasks to more demanding applications.
6. Easy Maintenance:
Maintenance of rotary vane compressors is relatively straightforward. Routine maintenance tasks typically include oil changes, filter replacements, and periodic inspection of vanes and seals. The simplicity of the design and the availability of replacement parts make maintenance and repairs easier and more cost-effective.
These advantages make rotary vane compressors an attractive choice for many applications, providing reliable and efficient compressed air solutions.
How are air compressors employed in the mining industry?
Air compressors play a crucial role in the mining industry, providing reliable and efficient power for various mining operations. Here are some common applications of air compressors in mining:
1. Exploration and Drilling:
Air compressors are used during exploration and drilling activities in the mining industry. Compressed air is used to power drilling rigs, pneumatic hammers, and other drilling equipment. The high-pressure air generated by the compressor helps in drilling boreholes, extracting core samples, and exploring potential mineral deposits.
2. Ventilation and Air Quality Control:
Air compressors are employed in underground mining to provide ventilation and control air quality. Compressed air is used to operate ventilation fans and air circulation systems, ensuring adequate airflow and removing harmful gases, dust, and fumes from the mining tunnels and work areas.
3. Material Conveyance:
In mining operations, air compressors are used for material conveyance. Pneumatic systems powered by air compressors are utilized to transport materials such as coal, ore, and other minerals. Compressed air is used to operate pneumatic conveyors, pumps, and material handling equipment, allowing for efficient and controlled movement of bulk materials.
4. Dust Suppression:
Air compressors are employed for dust suppression in mining areas. Compressed air is used to spray water or other suppressants to control dust generated during mining activities. This helps in maintaining a safe and healthy work environment, reducing the risks associated with dust inhalation and improving visibility.
5. Instrumentation and Control:
Air compressors are used for instrumentation and control purposes in mining operations. Compressed air is utilized to power pneumatic control systems, control valves, and actuators. These systems regulate the flow of fluids, control equipment movements, and ensure the proper functioning of various mining processes.
6. Explosive Applications:
In mining, air compressors are used for explosive applications. Compressed air is employed to power pneumatic tools used for rock fragmentation, such as rock drills and pneumatic breakers. The controlled power of compressed air enables safe and efficient rock breaking without the need for traditional explosives.
7. Maintenance and Repair:
Air compressors are essential for maintenance and repair activities in the mining industry. Compressed air is used for cleaning machinery, removing debris, and powering pneumatic tools for equipment maintenance and repair tasks. The versatility and portability of air compressors make them valuable assets in maintaining mining equipment.
It is important to note that different mining operations may have specific requirements and considerations when selecting and using air compressors. The size, capacity, and features of air compressors can vary based on the specific mining application and environmental conditions.
By utilizing air compressors effectively, the mining industry can benefit from increased productivity, improved safety, and efficient operation of various mining processes.
.webp)
What is the role of air compressor tanks?
Air compressor tanks, also known as receiver tanks or air receivers, play a crucial role in the operation of air compressor systems. They serve several important functions:
1. Storage and Pressure Regulation: The primary role of an air compressor tank is to store compressed air. As the compressor pumps air into the tank, it accumulates and pressurizes the air. The tank acts as a reservoir, allowing the compressor to operate intermittently while providing a steady supply of compressed air during periods of high demand. It helps regulate and stabilize the pressure in the system, reducing pressure fluctuations and ensuring a consistent supply of air.
2. Condensation and Moisture Separation: Compressed air contains moisture, which can condense as the air cools down inside the tank. Air compressor tanks are equipped with moisture separators or drain valves to collect and remove this condensed moisture. The tank provides a space for the moisture to settle, allowing it to be drained out periodically. This helps prevent moisture-related issues such as corrosion, contamination, and damage to downstream equipment.
3. Heat Dissipation: During compression, air temperature increases. The air compressor tank provides a larger surface area for the compressed air to cool down and dissipate heat. This helps prevent overheating of the compressor and ensures efficient operation.
4. Pressure Surge Mitigation: Air compressor tanks act as buffers to absorb pressure surges or pulsations that may occur during compressor operation. These surges can be caused by variations in demand, sudden changes in airflow, or the cyclic nature of reciprocating compressors. The tank absorbs these pressure fluctuations, reducing stress on the compressor and other components, and providing a more stable and consistent supply of compressed air.
5. Energy Efficiency: Air compressor tanks contribute to energy efficiency by reducing the need for the compressor to run continuously. The compressor can fill the tank during periods of low demand and then shut off when the desired pressure is reached. This allows the compressor to operate in shorter cycles, reducing energy consumption and minimizing wear and tear on the compressor motor.
6. Emergency Air Supply: In the event of a power outage or compressor failure, the stored compressed air in the tank can serve as an emergency air supply. This can provide temporary air for critical operations, allowing time for maintenance or repairs to be carried out without disrupting the overall workflow.
Overall, air compressor tanks provide storage, pressure regulation, moisture separation, heat dissipation, pressure surge mitigation, energy efficiency, and emergency backup capabilities. They are vital components that enhance the performance, reliability, and longevity of air compressor systems in various industrial, commercial, and personal applications.
editor by CX 2023-10-09
China factory High Temperature Type Refrigerated Air Dryer 1.2m3/Min 116psi 10HP Oil Lubricated Screw Air Compressor manufacturer
Product Description
Integrated air tank air dryer screw air compressor
Belt driven type Screw Air Compressor Specifications
* Genuine belt to meet the demand of heavy-duty, long life and high reliability.
* Convenient belt tensioning device makes the maintenance easy,and the transmisstion high-efficiency is ensured.
* Provide the flexibility for the customers easily modify the working pressure if a change becomes necessary.
* Low operation cost
* Energy saving
KP-LB Belt Drive Integrated Type Screw Air Compressor with air tank air dryer
Power range: 20hp ~ 600hp
Pressure: 7-13 Bar
* 7bar/8bar/10bar/12.5bar working pressure(discharge pressure) for your selection (for more lower pressure 4bar or 6bar, please send your inquiry )
* Intelligent microcomputer control system, controller has the remind & record function, show the compressor operation situation clearly
* Superior components, low maintenance cost
* Germany OPTI belt, easy for replace, and ensure the product quality
* Oversize air-end, low rpm, no overheat problem
* IP54/IP55 high quality motor, SK F bearing, Class F level insulation; Class BTemperature rise;
* Discharge temperature= Ambient temperature+15ºC, with cooling/ventilation system tailor made to the same local hot-humid climatic condition, NO OVERHEATING ON CONTINUOUS 100% LOAD IS GUARANTEED!
* Top door is locking design, easy to open to clean the cooler and fan
*Compressor is filled with lubrication oil before delivering, you can operate it after installed and powered on. Once it run 500hours to change the new air filter and oil filter was set for first maintenance, then normally change them with 2000-3000hours for once maintenance replacing new one.
* Phase reversal protection, current overload protection, pressure protection, overheat protection
| Technical Parameters of LB-TY Fixed Belt Drive Screw Compressor | ||||||||
| Model No. | Motor Power (kw) | Horse Power (Hp) |
Air delivery(m³/mim) | Working pressure(bar) | Air Dryer Model | Air Tank (L) |
L*W*H(mm) | N.W(KG) |
| LB-4TY | 4 | 5.5 | 0.74 | 7 | HAD-001-1NF (1.0m3/min) |
250L | 1400*670*1550 | 400 |
| 0.66 | 8 | |||||||
| 0.56 | 10 | |||||||
| LB-5.5TY | 5.5 | 7.5 | 0.8 | 7 | HAD-001-1NF (1.0m3/min) |
250L | 1400*670*1550 | 450 |
| 0.7 | 8 | |||||||
| 0.6 | 10 | |||||||
| LB-7.5TY | 7.5 | 10 | 1.2 | 7 | HAD-001NF (1.6m3/min) |
250L | 1400*670*1550 | 500 |
| 1.1 | 8 | |||||||
| 1 | 10 | |||||||
| 0.8 | 13 | |||||||
| LB-11TY | 11 | 15 | 2.0 | 7 | HAD-003NF (2.7m3/min) |
300L | 1400*670*1550 | 550 |
| 1.6 | 8 | |||||||
| 1.42 | 10 | |||||||
| 1.14 | 13 | |||||||
| LB-15TY | 15 | 20 | 2.5 | 7 | HAD-003NF (2.7m3/min) |
300L | 1150*800*1100 | 390 |
| 2.3 | 8 | |||||||
| 2 | 10 | |||||||
| 1.75 | 13 | |||||||
| LB-18.5TY | 18.5 | 25 | 3.1 | 7 | HAD-003NF (3.8m3/min) |
250L*2 | 1650*800*1840 | 620 |
| 2.9 | 8 | |||||||
| 2.6 | 10 | |||||||
| 2.2 | 13 | |||||||
| LB-22TY | 22 | 30 | 3.5 | 7 | HAD-003NF (3.8m3/min) |
250L*2 | 1650*800*1840 | 700 |
| 3.3 | 8 | |||||||
| 3.0 | 10 | |||||||
| 2.6 | 13 | |||||||
| *According to the standard of GB19153-2009 *Compressor Stage: CHINAMFG Compression *Standard Power Supply: 380V/50Hz/3ph *Exhaust Temperature: Ambient Temperature +15ºC *Configurated normal temperature type Air dryer,with Dew Point range: 3-10ºC; *Please contact us for any specification that is not within the above mentioned standard. |
||||||||
| Welcome to join us ! We Consider Our Customers as Our Friends and Families, and We do Believe in the CHINAMFG Situation for Building up Long-Term Relationship. • Innovation Provide innovative, stable products and services. • Quality Deliver consistently superior performance and pursue every possible improvement. • Agility Identify emerging trends and act quickly to acquire new opportunities. • Customer Satisfaction Anticipate customer needs and exceed their expectations. • Warranty Within 12 months since the customer used,or 18 months since shipped from factory, no matter which expires, we ensure that no defects for material and manufacturing. |
||||||||
| Name | 7.5KW Belt Driven Integrated Screw Air Compressor | |||||
| Model | SLB-7.5-7 | SLB-7.5-8 | SLB-7.5-10 | SLB-7.5-13 | ||
| Specification | Working pressure | bar | 7bar | 8bar | 10bar | 13bar |
| Air delivery | M³/min | 1.15m3/min | 1.06m3/min | 0.85m3/min | 0.65m3/min | |
| Motor power | KW | 7.5KW | ||||
| Voltage | V | 380V/50Hz/3ph (other voltage need to take 20days customize produciton ) |
||||
| Outlet dia | G3/4 | |||||
| Weight | Kg | 280 | ||||
| Dimension | (L*W*H)mm | 1650*800*1700mm (Integrated compressor+dryer+tank) | ||||
| Compressor type | Single Stage | Screw | ||||
| Start mode | Delta Start | |||||
| Cool method | Air cooled | |||||
| Driven method | belt driven | |||||
| Discharge temp | ºC | Ambient temp+10-15ºC | ||||
| Compressed oil content | ppm | ≤3PPM | ||||
| Noise | dB(A) | 78 | ||||
| Motor Protection grade | (IP54) | IP54 / Class F insulation/ Class B temperature rise | ||||
| Max ambient temp | ºC | ≤40ºC | ||||
| Control mode | PLC | MAM PLC | ||||
| Lubricant Oil replace regular time | H | 3000hrs(First runing time only 500hrs) | ||||
| Oil separator replace regular time | H | 3000hrs | ||||
| Oil Filter replace regular time | H | 3000hrs(First runing time only 500hrs) | ||||
| Air filter element replace regular time | H | 3000hrs(First runing time only 500hrs) | ||||
| Configured Refrigerated Air Dryer Specification | m3/min | 1.2m3/min | ||||
| Voltage | 220V/50Hz/1ph | |||||
| Configured Air Tank Volume | L | 300L (GB-150 standard pressure vessel) | ||||
KEEPWIN TECHNOLOGY ZheJiang CO.,LTD is a high-tech joint-stock enterprise which specializes in the development and designing, manufacturing and installation, mating remolding, and sales service of compressors as well as the corresponding pre-and post-position purifying equipment. CHINAMFG offers you a various range of gas compressors like normal standard screw compressor, piston compressor, diaphragm compressor, CNG compressor, CO2 compressor, Hydrogen compressor, Nitrogen booster compressor, etc. for your process handling needs. These products are developed with the highest level of professionalism and innovation. The premium-grade raw material and advanced technology is utilized in the production process, which assists us in giving required shape, design, and finish to the finished products. The products are then sent to the Quality Control Department for stringent quality tests on various parameters.
Keepwin Gas Solution Engineer can customize any special gas Reciprocating Piston Compressor & high pure gas flammable gas oil-free Diaphragm Compressor, and Industry using Screw Air Compressor & Portable Piston Air Compressor.
A. The gas compression medium
B. The flow rate: _____Nm3/hr
C. Inlet pressure: _____ Barg(gauge pressure)
D. Discharge pressure: _____ Barg(gauge pressure)
E. Inlet gas temperature & Outlet gas temperature
F. Cooling water temperature as well as other technical requirement.
G. Voltage/Frequency/Phase
The compressed medium may also include flammable and explosive gas, such as Natural Gas, Coal Gas ,coking gas, oxygen gas, Hydrogen gas, as well as special gas which are toxic gas and corrosive gas, radioactive gas. CHINAMFG has taken a series of technical measures in aspects such as structure material, explosion prevention, auto-control and protection to guarantee safety and reliability.
The products are stable,reliable and have already been in series and modularized.CHINAMFG can aslo rapidly provide products of other specifications through modular combination design CHINAMFG users’ requirements.
Customer Case
FAQ
Q1: What’s your delivery time?
A: Generally CHINAMFG with 20-30 days, Reciprocating compressor & diaphragm high pressure gas comrpessor with 12-20weeks to customize producing.
Q2: How long is your air compressor warranty?
A: Usually 1 year /12 Months for whole compressor machine, 2years/24months for air end (except maintenance spare parts.). And we can provide further warranty if necessary.
Q3: How long could your air compressor be used?
A: Generally, more than 10 years.
Q4: Can you do OEM for us?
A: Yes, of course. We have around 2 decades OEM experience.And also we can do ODM for you.
Q5: What’s payment term?
A: T/T, L/C, D/P, Western Union, Paypal, Credit Card, Trade Assurance and etc. Also we could accept USD, RMB, GBP, Euro and other currency.
Q6: How about your customer service?
A: 24 hours on-line service available. 48hours problem sovled promise.
Q7: How about your after-sales service?
A: 1. Provide customers with intallation and commissioning online instructions.
2. Well-trained engineers available to overseas after-sales service.
Q8. Are you factory?
A4: Absolutely! You have touched the primary sources of Air Gas Compressor. We are factory.
How to contact with us?
Send your Inquiry Details in the Below, or Click “Back to Home” to check more other Gas Compressor machine equipment!
| Lubrication Style: | Lubricated |
|---|---|
| Cooling System: | Air Cooling |
| Power Source: | AC Power |
| Cylinder Position: | Horizontal |
| Structure Type: | Closed Type |
| Installation Type: | Stationary Type |
| Samples: |
US$ 3500/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
|
|
|---|
.webp)
What are the differences between stationary and portable air compressors?
Stationary and portable air compressors are two common types of air compressors with distinct features and applications. Here are the key differences between them:
1. Mobility:
The primary difference between stationary and portable air compressors is their mobility. Stationary air compressors are designed to be permanently installed in a fixed location, such as a workshop or a factory. They are typically larger, heavier, and not easily movable. On the other hand, portable air compressors are smaller, lighter, and equipped with handles or wheels for easy transportation. They can be moved from one location to another, making them suitable for jobsites, construction sites, and other mobile applications.
2. Power Source:
Another difference lies in the power source used by stationary and portable air compressors. Stationary compressors are usually powered by electricity, as they are designed for continuous operation in a fixed location with access to power outlets. They are connected to the electrical grid or have dedicated wiring. In contrast, portable compressors are available in various power options, including electric, gasoline, and diesel engines. This versatility allows them to operate in remote areas or sites without readily available electricity.
3. Tank Capacity:
Tank capacity is also a distinguishing factor between stationary and portable air compressors. Stationary compressors often have larger storage tanks to store compressed air for extended periods. The larger tanks enable them to deliver a continuous and steady supply of compressed air for longer durations without the need for frequent cycling. Portable compressors, due to their compact size and portability, generally have smaller tank capacities, which may be sufficient for intermittent or smaller-scale applications.
4. Performance and Output:
The performance and output capabilities of stationary and portable air compressors can vary. Stationary compressors are typically designed for high-volume applications that require a consistent and continuous supply of compressed air. They often have higher horsepower ratings, larger motor sizes, and higher air delivery capacities. Portable compressors, while generally offering lower horsepower and air delivery compared to their stationary counterparts, are still capable of delivering sufficient air for a range of applications, including pneumatic tools, inflation tasks, and light-duty air-powered equipment.
5. Noise Level:
Noise level is an important consideration when comparing stationary and portable air compressors. Stationary compressors, being larger and built for industrial or commercial settings, are often equipped with noise-reducing features such as sound insulation and vibration dampening. They are designed to operate at lower noise levels, which is crucial for maintaining a comfortable working environment. Portable compressors, while efforts are made to reduce noise, may produce higher noise levels due to their compact size and portability.
6. Price and Cost:
Stationary and portable air compressors also differ in terms of price and cost. Stationary compressors are generally more expensive due to their larger size, higher power output, and industrial-grade construction. They often require professional installation and may involve additional costs such as electrical wiring and system setup. Portable compressors, being smaller and more versatile, tend to have a lower upfront cost. They are suitable for individual users, contractors, and small businesses with budget constraints or flexible air supply needs.
When selecting between stationary and portable air compressors, it is essential to consider the specific requirements of the intended application, such as mobility, power source availability, air demands, and noise considerations. Understanding these differences will help in choosing the appropriate type of air compressor for the intended use.
How do you choose the right air compressor for woodworking?
Choosing the right air compressor for woodworking is essential to ensure efficient and effective operation of pneumatic tools and equipment. Here are some factors to consider when selecting an air compressor for woodworking:
1. Required Air Volume (CFM):
Determine the required air volume or cubic feet per minute (CFM) for your woodworking tools and equipment. Different tools have varying CFM requirements, so it is crucial to choose an air compressor that can deliver the required CFM to power your tools effectively. Make sure to consider the highest CFM requirement among the tools you’ll be using simultaneously.
2. Tank Size:
Consider the tank size of the air compressor. A larger tank allows for more stored air, which can be beneficial when using tools that require short bursts of high air volume. It helps maintain a consistent air supply and reduces the frequency of the compressor cycling on and off. However, if you have tools with continuous high CFM demands, a larger tank may not be as critical.
3. Maximum Pressure (PSI):
Check the maximum pressure (PSI) rating of the air compressor. Woodworking tools typically operate within a specific PSI range, so ensure that the compressor can provide the required pressure. It is advisable to choose an air compressor with a higher maximum PSI rating to accommodate any future tool upgrades or changes in your woodworking needs.
4. Noise Level:
Consider the noise level of the air compressor, especially if you’ll be using it in a residential or shared workspace. Some air compressors have noise-reducing features or are designed to operate quietly, making them more suitable for woodworking environments where noise control is important.
5. Portability:
Assess the portability requirements of your woodworking projects. If you need to move the air compressor frequently or work in different locations, a portable and lightweight compressor may be preferable. However, if the compressor will remain stationary in a workshop, a larger, stationary model might be more suitable.
6. Power Source:
Determine the power source available in your woodworking workspace. Air compressors can be powered by electricity or gasoline engines. If electricity is readily available, an electric compressor may be more convenient and cost-effective. Gasoline-powered compressors offer greater flexibility for remote or outdoor woodworking projects where electricity may not be accessible.
7. Quality and Reliability:
Choose an air compressor from a reputable manufacturer known for producing reliable and high-quality equipment. Read customer reviews and consider the warranty and after-sales support offered by the manufacturer to ensure long-term satisfaction and reliability.
8. Budget:
Consider your budget and balance it with the features and specifications required for your woodworking needs. While it’s important to invest in a reliable and suitable air compressor, there are options available at various price points to accommodate different budgets.
By considering these factors and evaluating your specific woodworking requirements, you can choose an air compressor that meets the demands of your tools, provides efficient performance, and enhances your woodworking experience.
.webp)
What is the difference between a piston and rotary screw compressor?
Piston compressors and rotary screw compressors are two common types of air compressors with distinct differences in their design and operation. Here’s a detailed explanation of the differences between these two compressor types:
1. Operating Principle:
- Piston Compressors: Piston compressors, also known as reciprocating compressors, use one or more pistons driven by a crankshaft to compress air. The piston moves up and down within a cylinder, creating a vacuum during the intake stroke and compressing the air during the compression stroke.
- Rotary Screw Compressors: Rotary screw compressors utilize two intermeshing screws (rotors) to compress air. As the male and female screws rotate, the air is trapped between them and gradually compressed as it moves along the screw threads.
2. Compression Method:
- Piston Compressors: Piston compressors achieve compression through a positive displacement process. The air is drawn into the cylinder and compressed as the piston moves back and forth. The compression is intermittent, occurring in discrete cycles.
- Rotary Screw Compressors: Rotary screw compressors also employ a positive displacement method. The compression is continuous as the rotating screws create a continuous flow of air and compress it gradually as it moves along the screw threads.
3. Efficiency:
- Piston Compressors: Piston compressors are known for their high efficiency at lower flow rates and higher pressures. They are well-suited for applications that require intermittent or variable air demand.
- Rotary Screw Compressors: Rotary screw compressors are highly efficient for continuous operation and are designed to handle higher flow rates. They are often used in applications with a constant or steady air demand.
4. Noise Level:
- Piston Compressors: Piston compressors tend to generate more noise during operation due to the reciprocating motion of the pistons and valves.
- Rotary Screw Compressors: Rotary screw compressors are generally quieter in operation compared to piston compressors. The smooth rotation of the screws contributes to reduced noise levels.
5. Maintenance:
- Piston Compressors: Piston compressors typically require more frequent maintenance due to the higher number of moving parts, such as pistons, valves, and rings.
- Rotary Screw Compressors: Rotary screw compressors have fewer moving parts, resulting in lower maintenance requirements. They often have longer service intervals and can operate continuously for extended periods without significant maintenance.
6. Size and Portability:
- Piston Compressors: Piston compressors are available in both smaller portable models and larger stationary units. Portable piston compressors are commonly used in construction, automotive, and DIY applications.
- Rotary Screw Compressors: Rotary screw compressors are typically larger and more suitable for stationary installations in industrial and commercial settings. They are less commonly used in portable applications.
These are some of the key differences between piston compressors and rotary screw compressors. The choice between the two depends on factors such as required flow rate, pressure, duty cycle, efficiency, noise level, maintenance needs, and specific application requirements.
editor by CX 2023-10-02
China supplier Manufacturer Supply Industrial Portable Diesel Rotary Screw Air Compressor Drill Mining 175 Cfm Diesel Air Compressor air compressor portable
Product Description
Manufacturer Supply Industrial Portable Diesel Rotary Screw Air Compressor Drill Mining 175 CFM Diesel Air Compressor
Q: Are you a factory or a trading company?
A: We are factory. And we have ourselves trading company.
Q: What is the specific address of your company?
A: No.3, 2nd Street, yuanle Road, Xihu (West Lake) Dis.sheng Town, HangZhou City, ZheJiang Province, China
Q: Do your company accept ODM & OEM?
A: Yes, of course. We accept full ODM & OEM.
Q: What about the voltage of products? Can they be customized?
A: Yes, of course. The voltage can be customized according to your requirement.
Q: Do your company offer spare parts of the machines?
A: Yes, of course, high quality spare parts are available in our factory.
Q: What are your payment terms?
A: 50% T/T in advance, 50% T/T before delivery.
Q: What payment ways do you accept?
A: T/T, Western Union
Q: How long will you take to arrange the goods?
A: For normal voltages,we can delivery the goods within 7-15 days. For other electricity or other customized machines, we
will delivery within 25-30 days.
Manufacturer Supply Industrial Portable Diesel Rotary Screw Air Compressor Drill Mining 175 CFM Diesel Air Compressor
| After-sales Service: | Video Support |
|---|---|
| Warranty: | 1 Year Warranty |
| Lubrication Style: | Lubricated |
| Cooling System: | Air Cooling |
| Power Source: | AC Power |
| Structure Type: | Closed Type |
| Samples: |
US$ 2999/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
|
|
|---|
Choosing an Air Compressor
Considering a new Air Compressor? Here are some tips to make the decision easier. Learn the pros and cons of each type, including the differences between oil-injected and oil-free models, single stage and positive displacement. In addition, learn more about the different technologies that are available for your air compressor. It is important to choose an appropriate unit for the type of work you do. Here are some of the best compressors available today.
Positive displacement
There are several different types of air compressors, but most are positive displacement air compressors. They use a rotary or reciprocating component to compress air. The reciprocating component compresses air by reducing the volume of the chamber. Positive displacement compressors are used in bicycle pumps, chemical plants, and refrigerators. Positive displacement air compressors use multiple inlet ports. Despite the various types, the principle of operation remains the same.
Another type of positive displacement air compressor is a reciprocating piston. The piston inside a cylinder moves up and down, causing the compressed air to fill the upper part of the cylinder. These air compressors are used in a variety of different applications, including blowing bottles and gas pipelines. These air compressors can be water-cooled, lubricated, or non-lubricated. Different types have different capacities and air pressures.
A positive displacement flowmeter uses a rotating chamber that divides continuous fluid into discrete portions. The number of times the chamber is filled and discharged can be used to estimate the flow rate. The rotation speed of the measuring chamber is directly proportional to the flow rate. The drawbacks of this type of positive displacement flowmeter are that it is prone to jamming. If the fluid contains particles, it may be too thick for the meter to determine flow rate.
A negative displacement air compressor was invented in 1860 and is the oldest type of compressor. It uses two lobes positioned in a circular cavity. One rotor is connected to an engine, while the other pushes the other one to spin in the opposite direction. Negative displacement compressors are low-maintenance, but they do require more precision. They are often used in nuclear power plants because they use the kinetic energy of the rotating elements to produce pressure.
Oil-injected
Oil-flooded or oil-injected air compressors use liquid to seal and lubricate moving parts and reduce noise. Oil-flooded air compressors are effective for a variety of pneumatic tools and accessories. Some models have a thermostat that controls the amount of oil used during operation. Other types of oil-flooded air compressors are piston-type models. Here is an overview of the basic differences between these two air compressors.
An oil-injected air compressor is more expensive than a comparable oil-free air compressor, but its advantages far outweigh its disadvantages. An oil-free compressor is quieter, requires less maintenance, and has a lower price tag. It also offers a greater degree of air purity. A number of other advantages may also make this type of air compressor the better choice for many industrial settings. If you need a high-pressure compressor in a tight space, consider the benefits of an oil-free system.
Oil-injected air compressors require more maintenance than oil-free models. Both types of air compressors offer similar capacity and ISO 8573-1 Class 0 and 1-2 purity, but the oil-injected systems require more air-treatment components. They require an activated carbon filter and coalescing filter. Oil-injected air compressors will likely remain the standard for industrial air compressors for many years. And since their performance and efficiency are comparable, it may be worthwhile to invest in some point-of-use air treatment.
Both types of air compressors have their benefits. However, choosing between oil-free and oil-injected air compressors is not as straightforward as you might think. Whichever type you choose, make sure it will meet your needs. The benefits of an oil-injected air compressor outweigh their disadvantages. In general, oil-injected air compressors are more durable and can last longer than oil-free models. The only downside is their higher price.
Oil-free
When choosing an air compressor for your company, you’ll need to determine what it is going to be used for. For example, if you’re planning on using it to power multiple workers, you should consider getting an oil-free compressor. An oil-free compressor, on the other hand, is quieter and can power several workers at a time. If you’re a contractor, the most important consideration will be the type of jobs you’ll be doing. Higher air pressure means greater demand for air flow, and more pressure can damage the equipment.
Oil-free compressed air is certified 100% free of contaminants. Technically, oil-free air is not completely free of foreign matter, but it is extremely low within the limits of practical air quality. A technically oil-free air compressor might have a total oil level of 0.003 mg/m3. If you’re in need of a technically oil-free air compressor, you must install an air treatment equipment after your current compressor.
If you’re in the manufacturing industry, a good oil-free air compressor will save you money and reduce your environmental impact. Many of these tools require air compressors to work, and this equipment will ensure that they don’t get contaminated. To buy the best oil-free compressor, you should learn a bit about the different terms used by compressor repair companies. ACFM, for example, is the amount of air that can be compressed in one minute at rated conditions.
When you’re using an oil-free air compressor, you should know that the overall life of the device will be much shorter. Compared to an oil-flooded rotary screw air compressor, an oil-free compressor typically has a lifespan of 50 thousand hours. But it’s important to understand that this type of compressor can still cause damage to piping and processes. Therefore, you should choose an oil-free compressor when you need to clean air for your business.
Single-stage
A single-stage air compressor, also known as a piston air compressor, compresses air only once before storing it in a cylinder. This stored air has enough energy to power a variety of pneumatic tools, such as screwdrivers, chisels, and wrenches. These units are also ideally suited for low-flow applications and are widely used in gas stations, auto shops, and various manufacturing plants.
A single-stage air compressor uses two valves – one for inlet and one for outlet – to transfer compressed air. Both valves are actuated by springs. The inlet valve has a slight curvature to provide protection from damage. The compressor’s outlet valve opens when the pressure in the cylinder is higher than the pressure in the storage tank. The piston moves very quickly inside the cylinder, exerting a high amount of force throughout the compression process. This high piston speed is a common cause of compressor wear and tear.
A single-stage air compressor is ideal for smaller tradesmen and small construction crews. Its lightweight and compact design make it easier to transport and store. While it may be tempting to buy the first cheap air compressor you see, it’s important to balance the price against performance to choose the right air compressor for your needs. The best single-stage air compressor is one that provides excellent performance and durability. Its two-stage counterpart is designed for larger construction teams and large applications.
The main difference between a single-stage and a two-stage air compressor lies in their capacity. A single-stage air compressor compresses air only once and delivers it into the storage tank, while a two-stage compressor compresses it twice, creating double the pressure. Because of this, single-stage air compressors are cheaper and versatile than their counterparts, which means that they can be used for multiple purposes.
Low-noise
A low-noise air compressor is a type of industrial compressor that is less noisy than regular air compressors. These are generally smaller machines designed for smaller factories and workshops with a few to several employees. They are designed to handle mid-weight volumes of compressed air per day. This type of compressor is especially useful for smaller manufacturing businesses that need to produce compressed air for medical applications. Small breweries can also benefit from the low-noise capabilities of these compressors.
Low-noise air compressors come in various sizes and features. For smaller jobs, you can purchase a one-gallon model that is lightweight and portable. For larger jobs, you can purchase one with a larger tank that can provide more pressure for longer jobs. However, a larger tank will make the compressor heavier and harder to transport. To avoid this, make sure to check the size of the tank and how much power it can handle.
Considering a low-noise air compressor for your business? If so, you’ve come to the right place. There are a variety of affordable and dependable low-noise options to choose from. A CAT 10020C, for example, is designed to provide high-volume air to many outlets at once. A CAT 10020C comes with a 10-gallon tank, wheels, and a carrying handle.
Noise levels can also affect the productivity of employees. When employees work with air compressors in close proximity to each other, they may develop tinnitus. If employees are free from tinnitus because of the loud noise, they are likely to work more efficiently. Moreover, it will be easier for them to focus and communicate efficiently. If you need a compressor, a low-noise one is an excellent choice.
editor by CX 2023-04-22
China 30% Electric Saving Oil-Injected Energy-Efficient Screw Air Compressor manufacturer
Solution Description
Preserving electrical power Long term magnet variable frequency screw compressor ES7.five
Solution Description
Frequency conversion engineering
An common preserving of 35% of power intake has a vast assortment of adjustments in fluctuating manufacturing needs
Does not squander fuel in idle time and will not be discouraged throughout standard operation
The air compressor can be commenced or stopped under the stress of the total system, with no the need to have to set up a frequency converter
Reduce the influence on the grid at startup
Minimize technique leakage owing to reduce technique stress
The best combination of air compressor and frequency converter
New design, modest footprint
The new EA series has been optimized and enhanced, with changes to the fuselage and ingredient layout, saving a lot more room than typical compressors.
Comprehensive Pictures
| Oil-cooled motor The core components, magnet metal, enameled wire and insulating components, are all manufactured of higher-temperature-resistant grade resources, with a temperature-resistant quality of 180C. |
New oil-cooled motor Mould forming, no welding factors, zero chance Rotary oil passage circulation, small strain difference. It truly is a circular arc Circular arc floor oil passage, complete oil movement, uniform cooling oil passage on the exterior, easy to check and mend |
| Handy oil filter substitution and decontamination design and style Maintenance is much more handy and a lot quicker. Even though changing the oil filter, the remaining old oil in the cooler can be drained thoroughly clean. |
Rear exhaust style, to suck and blow The admirer exhausts warmth faster and lowers noise The classic admirer blows against the cooler, which has higher resistance and high sound. The rear row of warmth dissipation, the cooler is positioned vertically to avoid dust from prime to bottom on the cooler, which will result in slow blockage for a lengthy time. If there is drinking water dripping down, the electrical elements in the device will be destroyed or burned. This style avoids it. |
| Reputable consumption valve system Distinctive structural design, reputable intake valve method, no want to fear about emergency shutdown and sudden energy failure is gasoline injection. |
Dependable link method and materials The oil and air pipes of the complete motor are created of stainless steel or imported hoses, which are sturdy and not ageing. It is sealed with thread and flat O-ring, which is convenient for disassembly and no leakage. |
Item Parameters
|
US $3,500-9,800 / Piece | |
1 Piece (Min. Order) |
###
| Lubrication Style: | Lubricated |
|---|---|
| Cooling System: | Air Cooling |
| Power Source: | AC Power |
| Cylinder Position: | Horizontal |
| Structure Type: | Closed Type |
| Installation Type: | Stationary Type |
###
| Customization: |
Available
|
|---|
###
 Oil-cooled motor The core materials, magnet steel, enameled wire and insulating materials, are all made of high-temperature-resistant grade materials, with a temperature-resistant grade of 180C. |
New oil-cooled motor Mold forming, no welding points, zero risk Rotary oil passage circulation, small pressure difference. It’s a circular arc Circular arc surface oil passage, full oil flow, uniform cooling oil passage on the outside, easy to check and repair |
Convenient oil filter replacement and decontamination design Maintenance is more convenient and quicker. While replacing the oil filter, the remaining old oil in the cooler can be drained clean. |
Rear exhaust design, to suck and blow The fan exhausts heat faster and lowers noise The traditional fan blows against the cooler, which has high resistance and high noise. The rear row of heat dissipation, the cooler is placed vertically to avoid dust from top to bottom on the cooler, which will cause slow blockage for a long time. If there is water dripping down, the electrical components in the machine will be damaged or burned. This design avoids it. |
Reliable intake valve system Unique structural design, reliable intake valve system, no need to worry about emergency shutdown and sudden power failure is fuel injection. |
Reliable connection system and material The oil and air pipes of the whole engine are made of stainless steel or imported hoses, which are durable and not aging. It is sealed with thread and flat O-ring, which is convenient for disassembly and no leakage. |
|
US $3,500-9,800 / Piece | |
1 Piece (Min. Order) |
###
| Lubrication Style: | Lubricated |
|---|---|
| Cooling System: | Air Cooling |
| Power Source: | AC Power |
| Cylinder Position: | Horizontal |
| Structure Type: | Closed Type |
| Installation Type: | Stationary Type |
###
| Customization: |
Available
|
|---|
###
Oil-cooled motor The core materials, magnet steel, enameled wire and insulating materials, are all made of high-temperature-resistant grade materials, with a temperature-resistant grade of 180C. |
New oil-cooled motor Mold forming, no welding points, zero risk Rotary oil passage circulation, small pressure difference. It’s a circular arc Circular arc surface oil passage, full oil flow, uniform cooling oil passage on the outside, easy to check and repair |
Convenient oil filter replacement and decontamination design Maintenance is more convenient and quicker. While replacing the oil filter, the remaining old oil in the cooler can be drained clean. |
Rear exhaust design, to suck and blow The fan exhausts heat faster and lowers noise The traditional fan blows against the cooler, which has high resistance and high noise. The rear row of heat dissipation, the cooler is placed vertically to avoid dust from top to bottom on the cooler, which will cause slow blockage for a long time. If there is water dripping down, the electrical components in the machine will be damaged or burned. This design avoids it. |
Reliable intake valve system Unique structural design, reliable intake valve system, no need to worry about emergency shutdown and sudden power failure is fuel injection. |
Reliable connection system and material The oil and air pipes of the whole engine are made of stainless steel or imported hoses, which are durable and not aging. It is sealed with thread and flat O-ring, which is convenient for disassembly and no leakage. |
Choosing the Right Air Compressor For Your Home
You will find that air compressors are indispensable tools for a variety of situations, including garages, home workshops, and basements. These tools can power a variety of tools, and each model is sized to suit the job at hand. Because air compressors have only one motor, they are lightweight, compact, and easy to handle. Using one air compressor to power several tools will also reduce the wear and tear on individual components. This article will introduce some important characteristics to look for when choosing the right air compressor for your home.
Positive displacement
A positive displacement compressor applies pressure to a fluid, whereas a centrifugal one does the opposite. A positive displacement compressor creates the desired pressure by trapping air and increasing its volume. Its discharge valve releases the high-pressure gas. These compressors are used in industrial applications and nuclear power plants. The difference between a positive and negative displacement compressor is that a positive displacement compressor can compress and release air at a consistent rate.
A positive displacement air compressor uses a reciprocating piston to compress air. This reduces the volume of the air in the compression chamber, and a discharge valve opens when the pressure reaches the desired level. These compressors are used in bicycle pumps and other pneumatic tools. Positive displacement air compressors have multiple inlet ports and have several configurations. Positive displacement air compressors have a single-acting and double-acting piston, and can be oil-lubricated or oil-free.
A positive displacement air compressor is different from a dynamic compressor. It draws air into the compression chambers and then releases the pressure when the valve is opened. Positive displacement compressors are common in industrial applications and are available in single-acting, double-acting, and oil-lubricated models. Large piston compressors have ventilated intermediate pieces and crossheads on gudgeon pins. Smaller models have permanently sealed crankcases with bearings.
Oil-free
Oil-free air compressors have some advantages over their oil-lubricated counterparts. They do not require lubrication oil because they are coated with Teflon. The material has one of the lowest coefficients of friction and is layered, so it slides past other layers with little effort. Because of this, oil-free compressors tend to be cheaper and still deliver comparable performance. Oil-free compressors are a good choice for industrial applications.
The life of an oil-free air compressor is significantly longer than an oil-lubricated counterpart. These models can operate up to 2,000 hours, four times longer than the average oil-lubed compressor. Oil-free compressors also have a significantly lower operating noise than their oil-lubricated counterparts. And because they don’t need oil changes, they are quieter. Some even last up to 2,000 hours.
An oil-free air compressor is a good choice if your application requires high levels of purity. Several applications require ultra-pure air, and even a drop of oil can cause product spoilage or damage to production equipment. In addition to the health risks, an oil-free air compressor reduces the costs associated with oil contamination and minimizes leaks. It also eliminates the need for oil collection, disposal, and treatment.
A typical oil-free air compressor is very efficient, requiring only about 18% of the full load horsepower. However, oil-free compressors have a higher risk of premature failure and are not recommended for large-scale industrial applications. They may also use up to 18% of the compressor’s full capacity. They may sound appealing, but you must make sure you understand the benefits of an oil-free air compressor before choosing one for your industrial applications.
Single-stage
A single-stage air compressor is designed to provide the power for a single pneumatic tool or device. These machines are generally smaller than two-stage compressors and produce less heat and energy. These machines aren’t designed for heavy-duty industries, but they are still highly effective for a variety of applications, including auto shops, gas stations, and various manufacturing plants. They can also be used in borewells, as they are suitable for small spaces with low air flow requirements.
A single-stage air compressor has one cylinder and two valves – the inlet and the delivery valves. Both of these valves function mechanically, with the inlet valve controlling torque and the delivery one controlling air pressure. Generally, single-stage compressors are powered by a gas engine, but there are also electric models available. The single-stage air compressor is the most common type of air compressor. It has a single cylinder, one piston, and one air cylinder.
The single-stage air compressors are used for small projects or personal use. A two-stage air compressor is more effective for industrial projects. Its longer air end life makes it more efficient. It is also more efficient for use in the automotive industry, where the engine has many cylinders. In general, single-stage compressors require a higher power level. The single-stage model is ideal for small projects, while a two-stage one is suitable for larger-scale arsenals.
CFM
The cubic foot-per-minute (CFM) of an air compressor is the output of the machine. In order to calculate the CFM level, start by looking at the compressor’s specifications. You should know how many cubic feet the unit can hold and how many pounds per square inch it can compress. Once you have these information, you can calculate the CFM. Now you can use these numbers to select an appropriate air compressor for your needs.
The most common way to increase the CFM of an air compressor is to turn the regulator down. By turning the dial down, the air compressor will produce more than 10 CFM. You can also try connecting two output valves. Make sure that the settings are adjusted properly before you begin. This will ensure that your air compressor is functioning at its maximum efficiency and lifespan. To increase the CFM of your air compressor, first check that your regulator is calibrated for the desired pressure level.
To calculate the CFM of an air compressor, first determine the tank volume of the machine. Then, multiply this volume by the time it takes to fill the tank. Then, divide the result by 60 seconds to calculate the CFM. Once you know how much air your machine can hold, you can choose a suitable air compressor. If you’re working in a confined area, you should buy a tool with a large tank.
PSI
The PSI of an air compressor is the pressure that it can output. A typical air compressor has a gauge connected to the airline at the bottom, next to it, or between the two. The gauge tells the actual pressure of the air compressor, while the cut-out pressure is determined by the manufacturer. The manufacturer recommends that you set the cut-out pressure twenty to forty PSI higher than the factory recommended pressure. If you want to set the pressure for your nail gun, you can use the cut-in and cut-out pressures on your compressor, and the tank won’t exceed this range.
The PSI of an air compressor measures the force that it can deliver, which is often in pounds per square inch. For most air tools, you need at least forty to 90 psi. In general, reciprocating air compressors work on an on/off basis. This relationship is known as the duty cycle. All air compressors are rated for a particular duty cycle, such as fifty percent on and twenty-five percent off.
The Psig of an air compressor is not free, as many people believe. The PSI of an air compressor is not free, but it is essential to maintain it for safe operations. If you’re having trouble maintaining a consistent pressure, consider turning down the PSI of your compressor by 2 psig. This will determine the critical pressure for the machine. You’ll also increase the amount of energy in the system by one percent.
Power source
The power source for an air compressor is crucial in its operation. Without the correct voltage and amperage, air compressors will not function properly. The power source must be close to the compressor so that it can plug into an electrical outlet. If it is too far from the outlet, the compressor may not be able to build enough pressure. When this happens, the fuse inside the air compressor will turn off to protect the user. The power source should be a safe distance from the compressor.
Most manufacturers do not specify the power source for an air compressor. Depending on the horsepower, the compressor will require approximately four amps of power. A one-horsepower compressor would draw about twelve amps. If it were powered by a typical 120-volt household supply, its motor would exceed the 15-amp breaker capacity. A larger air compressor, however, will require a separate 15-amp power source, making it impossible to use it with this type of power source.
The power source for an air compressor is typically electrical alternating current (AC) that is equivalent to the voltage on a standard wall outlet. A three-phase air compressor, on the other hand, requires a special AC supply with three electrical offset pulses. Regardless of the type of air compressor, the power source must be compatible with the incoming power service. One of the most common problems when attempting to connect an air compressor to an AC power source is undersized wire. This results in low voltage and high amperes, tripping of over-load relays and blown fuses.
editor by czh 2022-12-28
China 45kw 60HP 8bar 10 Bar 16bar Manufacturer Silent VSD Air Compresor Energy Saving Pm Variable Speed Rotary Screw Compressor air compressor harbor freight
Solution Description
45KW 60HP 8bar ten Bar 16Bar Maker Silent VSD Air Compresor Vitality Conserving PM Variable Pace Rotary Screw Compressor
Specification:
| Parameter/Design | Displacement/Force | Cooling Technique | Lubrication volume(L) | Sounds db | Driving manner | Voltage | Energy | Start off up method | Dimention | Weight | Output pipe diameter | |||
| m3/min | KW/HP | L*W*H | KG | |||||||||||
| ZL-10A | .9/.seven | .8/.eight | .sixty nine/1. | .6/1.two | air cooling | 10 | 66±2 | direct driving | 220V/380V/415V50Hz/60Hz | seven.5/ten | y-start off-up varialbe Frequency beginning | 850*700*920 | 210 | G 1/2″ |
| ZL-20A | two.5/.seven | two.3/.eight | 2.1/1. | one.9/1.2 | air cooling | 18 | 68±2 | immediate driving | 220V/380V/415V50Hz/60Hz | 15/twenty | y-begin-up varialbe Frequency commencing | 950*750*1250 | 300 | G 3/four |
| ZL-30A | 3.8/.seven | 3.6/.8 | three.2/1. | two.7/1.2 | air cooling | 18 | 68±2 | direct driving | 220V/380V/415V50Hz/60Hz | 22/30 | y-commence-up varialbe Frequency beginning | 1380*850*1160 | 450 | G 1″ |
| ZL-50A | 6.8/.7 | 6.2/.8 | five.6/1. | 5./1.two | air cooling | thirty | 68±2 | immediate driving | 220V/380V/415V50Hz/60Hz | 37/fifty | y-commence-up varialbe Frequency commencing | 1550*a thousand*1330 | 650 | G 1-1/2 |
| ZL-10A-PM | .9/.7 | .8/.eight | .sixty nine/1. | .6/1.two | air cooling | 10 | 66±2 | immediate driving | 220V/380V/415V50Hz/60Hz | seven.5/10 | y-commence-up varialbe Frequency beginning | 850*seven-hundred*820 | 210 | G 1/2″ |
| ZL-20A-PM | two.5/.seven | two.3/.8 | two.1/1. | 1.9/1.2 | air cooling | 18 | 68±2 | immediate driving | 220V/380V/415V50Hz/60Hz | fifteen/twenty | y-commence-up varialbe Frequency commencing | 950*750*1250 | 300 | G 3/4″ |
| ZL-30A-PM | three.8/.seven | 3.6/.eight | three.2/1. | two.7/1.two | air cooling | eighteen | 68±2 | immediate driving | 220V/380V/415V50Hz/60Hz | 22/thirty | y-start off-up varialbe Frequency commencing | 1380*850*1160 | 450 | G 1″ |
| ZL-50A-PM | 6.8/.7 | 6.2/.8 | five.6/1. | five./1.two | air cooling | 30 | 68±2 | immediate driving | 220V/380V/415V50Hz/60Hz | 37/50 | y-begin-up varialbe Frequency starting up | 1550*a thousand*1330 | 650 | G 1-1/2″ |
Smart Screw Air Compressor
Ariend with substantial air stream,reduced nose ,substantial relisbility.
The existence of the spare parts is lengthy,simple to purchase ,dropped cost .
Effortless maintenanance,preserve a lot more time.
Product Features
Energy Saving
Extremely-low frequency pace management technologies significantly surpasses regular VSD compressor systems.
Able reduce than 15Hz operation,this technique is genuinely able of consistent variable stress operation and important energy preserving.
Large Trustworthiness
USoft-Commence attribute permits for litte or no influence on the electricity offer method and marginalises mechancial put on and tear up on begin-up.
LLeakageis constantly present in any air program .at complete presure a excellent method can unfastened .2Mpa.CZPT VSD machines can lessen thar loss by up to twenty five%simply by giving the air force that is essential.
MUTE ENVIRONMENTAL Security
Advanceed Vector variable frequency handle lowers vibration and noise.The device can be used with no the necessity for a special space.
This indicates preserving of all methods required to set up a machine in an external spot this kind of as pipe and electricity strains and land.Oil exhaust output is decrease than 3ppm as a result negating enviromantal impact.
Energy Saving 30%&More time Daily life
Utilising frequency handle for the cooling enthusiast and push motor makes it possible for for up to thirty% power personal savings.This translates into much less recurrent servicing of the screw compressor thus additional substantial conserving are reached more than the daily life of the machine.
Our Exhibition
For Far more Items
Why Believe in Us ?
Who We Are ?
ZHangZhoug Zhilun Mechanical &Electrical Co.Ltd. is 1 of the principal manufactures,specialised in R & D, production and product sales of the piston air compressor and screw air compressor. Our organization is found in CZPT city, LuQiao District, TaiZhou City, only 3km absent from TaiZhou Airport, and around 220km absent from HangZhou port. The targeted traffic is quite handy for your going to.
Our firm owns an location of 50000 suqare mater and has far more than three hundred staffs.
We have advanced manufacturing equipments and are common with the procedure of the mass generation. We also have high precision measuring instruments and substantial effectiveness of automatic assembly line to ensure the good quality and amount of the products. We have robust specialized energy and production management, gathering the technical crew and manamement crew from the leading air compressor enterprises. We established up our own growth team, which has a robust potential to create the item and can fulfill the various calls for from various buyer and makets.
We take the maket needs as the assistance, strives for the survival by top quality ,strives for the advancement by innovation,often place buyers,quality and innovation in the initial spot ,follow up the prefessional management and continuously fulfill the demanded of the consumer. We often comply with up the theory of individuals-oriented, genuine enterprise, CZPT & dependable, emphasis on the industy of the air compressor, with the effort to produce a first-course manufacturer in the industry of air compressor.
Frequency Questioned Issue:
Q1: Are you factory or trade business?
A1: We are manufacturing facility.Thank you.
Q2: What’s the specific deal with of your factory?
A2: Our organization located in CZPT town,LuQiao District, TaiZhou, ZHangZhoug Province, China . Thank you.
Q3: Warranty conditions of your air compressor equipment?
A3: One years warranty for the machine and complex support according to your wants.
Q4: Will you supply some spare areas of the air compressor?
A4: Yes, of program.
Q5: How long will you consider to prepare manufacturing?
A5: About 25 working times following receiving the deposit.
Q6: Can you take OEM orders?
A6: Yes, with professional design team, OEM orders are highly welcomed.
Q7:What trade terms do we provide ?
A7:Trade terms FOB, CIF.
Q8:What is our payment expression? What variety of settlement forex do we supply ?
A8:Normally, we can do T/T and LC at sight, for the T/T, thirty% will be necessary as deposit, the equilibrium volume against the duplicate of the BL.
We can take the forex in USD or RMB.
Q9:What about the expense of sample?
A9: The cost of the sample will be essential, but we can return again the volume in the potential purchase by 1*40’HQ.
|
US $3,000-4,000 / Piece | |
1 Piece (Min. Order) |
###
| After-sales Service: | Online Support |
|---|---|
| Warranty: | 12 Months |
| Lubrication Style: | Lubricated |
| Cooling System: | Air Cooling |
| Power Source: | AC Power |
| Cylinder Position: | Vertical |
###
| Samples: |
US$ 4000/Piece
1 Piece(Min.Order) |
|---|
###
| Customization: |
Available
|
|---|
###
| Parameter/Model | Displacement/Pressure | Cooling Method | Lubrication volume(L) | Noise db | Driving mode | Voltage | Power | Start up mode | Dimention | Weight | Output pipe diameter | |||
| m3/min | KW/HP | L*W*H | KG | |||||||||||
| ZL-10A | 0.9/0.7 | 0.8/0.8 | 0.69/1.0 | 0.6/1.2 | air cooling | 10 | 66±2 | direct driving | 220V/380V/415V;50Hz/60Hz | 7.5/10 | y-start-up; varialbe Frequency starting | 850*700*920 | 210 | G 1/2″ |
| ZL-20A | 2.5/0.7 | 2.3/0.8 | 2.1/1.0 | 1.9/1.2 | air cooling | 18 | 68±2 | direct driving | 220V/380V/415V;50Hz/60Hz | 15/20 | y-start-up; varialbe Frequency starting | 950*750*1250 | 300 | G 3/4 |
| ZL-30A | 3.8/0.7 | 3.6/0.8 | 3.2/1.0 | 2.7/1.2 | air cooling | 18 | 68±2 | direct driving | 220V/380V/415V;50Hz/60Hz | 22/30 | y-start-up; varialbe Frequency starting | 1380*850*1160 | 450 | G 1″ |
| ZL-50A | 6.8/0.7 | 6.2/0.8 | 5.6/1.0 | 5.0/1.2 | air cooling | 30 | 68±2 | direct driving | 220V/380V/415V;50Hz/60Hz | 37/50 | y-start-up; varialbe Frequency starting | 1550*1000*1330 | 650 | G 1-1/2 |
| ZL-10A-PM | 0.9/0.7 | 0.8/0.8 | 0.69/1.0 | 0.6/1.2 | air cooling | 10 | 66±2 | direct driving | 220V/380V/415V;50Hz/60Hz | 7.5/10 | y-start-up; varialbe Frequency starting | 850*700*820 | 210 | G 1/2″ |
| ZL-20A-PM | 2.5/0.7 | 2.3/0.8 | 2.1/1.0 | 1.9/1.2 | air cooling | 18 | 68±2 | direct driving | 220V/380V/415V;50Hz/60Hz | 15/20 | y-start-up; varialbe Frequency starting | 950*750*1250 | 300 | G 3/4″ |
| ZL-30A-PM | 3.8/0.7 | 3.6/0.8 | 3.2/1.0 | 2.7/1.2 | air cooling | 18 | 68±2 | direct driving | 220V/380V/415V;50Hz/60Hz | 22/30 | y-start-up; varialbe Frequency starting | 1380*850*1160 | 450 | G 1″ |
| ZL-50A-PM | 6.8/0.7 | 6.2/0.8 | 5.6/1.0 | 5.0/1.2 | air cooling | 30 | 68±2 | direct driving | 220V/380V/415V;50Hz/60Hz | 37/50 | y-start-up; varialbe Frequency starting | 1550*1000*1330 | 650 | G 1-1/2″ |
|
US $3,000-4,000 / Piece | |
1 Piece (Min. Order) |
###
| After-sales Service: | Online Support |
|---|---|
| Warranty: | 12 Months |
| Lubrication Style: | Lubricated |
| Cooling System: | Air Cooling |
| Power Source: | AC Power |
| Cylinder Position: | Vertical |
###
| Samples: |
US$ 4000/Piece
1 Piece(Min.Order) |
|---|
###
| Customization: |
Available
|
|---|
###
| Parameter/Model | Displacement/Pressure | Cooling Method | Lubrication volume(L) | Noise db | Driving mode | Voltage | Power | Start up mode | Dimention | Weight | Output pipe diameter | |||
| m3/min | KW/HP | L*W*H | KG | |||||||||||
| ZL-10A | 0.9/0.7 | 0.8/0.8 | 0.69/1.0 | 0.6/1.2 | air cooling | 10 | 66±2 | direct driving | 220V/380V/415V;50Hz/60Hz | 7.5/10 | y-start-up; varialbe Frequency starting | 850*700*920 | 210 | G 1/2″ |
| ZL-20A | 2.5/0.7 | 2.3/0.8 | 2.1/1.0 | 1.9/1.2 | air cooling | 18 | 68±2 | direct driving | 220V/380V/415V;50Hz/60Hz | 15/20 | y-start-up; varialbe Frequency starting | 950*750*1250 | 300 | G 3/4 |
| ZL-30A | 3.8/0.7 | 3.6/0.8 | 3.2/1.0 | 2.7/1.2 | air cooling | 18 | 68±2 | direct driving | 220V/380V/415V;50Hz/60Hz | 22/30 | y-start-up; varialbe Frequency starting | 1380*850*1160 | 450 | G 1″ |
| ZL-50A | 6.8/0.7 | 6.2/0.8 | 5.6/1.0 | 5.0/1.2 | air cooling | 30 | 68±2 | direct driving | 220V/380V/415V;50Hz/60Hz | 37/50 | y-start-up; varialbe Frequency starting | 1550*1000*1330 | 650 | G 1-1/2 |
| ZL-10A-PM | 0.9/0.7 | 0.8/0.8 | 0.69/1.0 | 0.6/1.2 | air cooling | 10 | 66±2 | direct driving | 220V/380V/415V;50Hz/60Hz | 7.5/10 | y-start-up; varialbe Frequency starting | 850*700*820 | 210 | G 1/2″ |
| ZL-20A-PM | 2.5/0.7 | 2.3/0.8 | 2.1/1.0 | 1.9/1.2 | air cooling | 18 | 68±2 | direct driving | 220V/380V/415V;50Hz/60Hz | 15/20 | y-start-up; varialbe Frequency starting | 950*750*1250 | 300 | G 3/4″ |
| ZL-30A-PM | 3.8/0.7 | 3.6/0.8 | 3.2/1.0 | 2.7/1.2 | air cooling | 18 | 68±2 | direct driving | 220V/380V/415V;50Hz/60Hz | 22/30 | y-start-up; varialbe Frequency starting | 1380*850*1160 | 450 | G 1″ |
| ZL-50A-PM | 6.8/0.7 | 6.2/0.8 | 5.6/1.0 | 5.0/1.2 | air cooling | 30 | 68±2 | direct driving | 220V/380V/415V;50Hz/60Hz | 37/50 | y-start-up; varialbe Frequency starting | 1550*1000*1330 | 650 | G 1-1/2″ |
A Buyer’s Guide to Air Compressor Types
There are many types of Air Compressors, and it’s important to understand what each type has to offer. In this article, we’ll discuss single stage air compressors, low-noise compressors, and models with two pistons. But, before you buy an Air Compressor, be sure to read our buyer’s guide to the various types. This way, you’ll have all of the information you need to make the right decision for your business.
Single-stage air compressors
A single-stage air compressor is an excellent choice for most general-purpose purposes. They provide enough power to operate pneumatic tools, and they produce less heat. Single-stage air compressors, however, are not suitable for heavy-duty industrial uses. However, they can be used in various applications, including auto shops, gas stations, and various manufacturing facilities. They are also suitable for borewells and other high-pressure places.
These air compressors are a great choice for home use and are suitable for small-scale businesses, contractors, and small shops. These compressors have continuous duty cycles, cast iron compressor pumps, and a minimum 5,000-hour pump life. They also feature advanced features, including ODP motors, Auto Start & Controls, Receiver tanks, and power cords. They have low maintenance and can save you a great deal of money.
Single-stage air compressors are generally less expensive and lighter than their two-stage counterparts. Single-stage air compressors are also more portable, which is a plus for small projects. While two-stage compressors offer higher CFM, they are more powerful and bulky, making them unsuitable for small or home use. So it is essential to determine what you will use the air compressor for and decide on a model based on your needs.
A single-stage air compressor is made of a piston and a tank. The piston moves rapidly inside the cylinder and exerts pressure on the cylinder. This means that the piston can’t move any faster than the air pressure outside the cylinder. The piston is designed to operate in the same way for each stage. This is a great choice for home shops and one-man automotive shops, as it allows you to control the pressure without sacrificing the pump’s life.
Single-stage air compressors are often cheaper than two-stage versions, but they are not the best choice for every application. If you are only using your air compressor occasionally, you’ll find a one-stage model to be much more reliable than a two-stage model. The main difference between the two types of compressors is in the amount of air that each stage compresses. A two-stage air compressor will have more air storage capacity, but it will still produce more pressure.
Rotary vane compressors
Rotary vane compressors use a centrifugal pump to compress air. The rotor is set eccentrically in the housing, which almost touches the vane. As the rotor turns, the air that enters the pump is trapped between the vanes. This compressed air undergoes compression as the rotor rotates. Vanes are small pieces of carbon fiber or graphite composite. Vanes may be made of different materials depending on the application.
While rotary vane pumps are not commonly used to produce compressed air, they are widely used in automotive and hydraulic applications. Chances are, you have used a rotary vane pump at some point in your life. These pumps are also common in the vacuum and compressed air industries. As a result, many people don’t realize that they’re still around. They feature slots that allow the vanes to slide in and out of the rotor.
A rotary vane compressor has a drum and rotor inside. The rotor is eccentrically positioned and has slots and grooves on its surface. Its inlet and outlet ports are situated off-center, allowing the vanes to be pushed out by centrifugal force. Because the rotor rotates so quickly, air is trapped between the vanes. This air then becomes pressurized by the rotating rotor.
Rotating vane compressors can be easily serviced and repaired. A simple replacement of carbon vanes requires just 15 minutes and common tools. The carbon vanes typically last nine to eighteen months, depending on system operating pressure. Before purchasing a rotary vane compressor, make sure to check whether it has been properly performance-tested and has a warranty. Generally, warranties cover the rotor/stator chambers but do not cover the vanes or air filters. You should also check if the unit is covered by a lightning or water damage warranty.
Rotary vane compressors are an integral part of manufacturing industries. Many pharmaceutical manufacturing facilities depend on rotary vane compressors to control their equipment. Other industries that use rotary vane compressors include the plastics, woodworking, natural gas, and medical & dental fields. Their benefits are numerous and far outweigh any disadvantages of rotary screw compressors. For example, a rotary vane compressor can double the life of a conventional compressor.
Rotary vane compressors with low-noise models
If you are looking for a rotary vane air compressor, you have come to the right place. CZPT’s LV Series rotary vane compressors offer low-noise models, compact size, and robust integration. In addition to their low-noise features, they feature large filter systems to deliver high-quality compressed air. The LV Series models also feature CZPT’s reputation for reliability and quality.
This type of compressor uses centrifugal force to operate and is limited in its top and minimum operating speeds. They are only a third as powerful as screw compressors, and their top speed limits are much lower. Furthermore, the vanes wear out easily at high speeds because there is not enough centrifugal force to seal them against the cylinder’s edges. Even at half their full capacity, they consume as much as 80% of their total energy rating.
Because piston compressors produce a lot of noise, factory owners and shop owners have begun to install noise-dampening cabinets and other solutions. But, rotary vane compressors produce far less noise than a traditional vacuum, and the maintenance costs are also low. Rotary vane compressors are also extremely helpful in several industries. They are used in the automotive and auto finishing industries, as well as in dairy industries and milking machines.
If you have a deep pond, a rotary vane air compressor kit can pump up to 20 feet of water. This is more than enough airflow for two to five diffusers. A 1/4 HP rotary vane kit pumps around 4.2 CFM. It also helps to increase circulation and oxygen levels in the pond. Finally, a 1/4 HP kit offers the necessary power to clean up the bottom of a pond.
The rotary vane and rotary screw are the most popular air compressors today. While they are similar in many ways, they are more versatile and durable than their counterparts. They use fewer angular contact ball bearings and require less frequent maintenance than piston air compressors. Compared to piston air compressors, rotary vane and rotary screw compressors are quieter and are less expensive.
Rotary vane compressors with two pistons
The rotary vane and rotary screw compressors are similar in application, but both have different advantages and disadvantages. This article will compare the benefits of each and highlight the differences between them. While both are commonly used in industrial applications, rotary vane compressors are preferred by many industries. These compressors also have a wide range of uses, ranging from automotive air tool operation to milking machines. These compressors also have the advantage of being quieter than piston-powered ones.
The current common rail position may not be suitable for pressure swirl injectors, but new positions have been tested and show improvements in specific energy values. Moreover, the current position is not required for external oil pumps. However, mass induction and expulsion have to be performed with utmost care. This article focuses on the design and efficiency of rotary vane compressors. You can find more information about this new design in the references mentioned below.
The advantages of this type of compressor are its low cost, compact size, and easy maintenance. Hence, they are preferred in low capacity applications. Moreover, they feature integrated vanes. The rotating vanes close the air gap and compress air towards the outlet. Compared to piston-powered compressors, these units are cheaper and more reliable. Therefore, you should choose one with the lowest price tag. You can also opt for rotary vane compressors that are oil-free.
Sliding vane compressors are another popular variant. They have a single cylinder connected to the compressor and are capable of operating at low speeds. This design also reduces the amount of friction and maintains volumetric efficiency. However, the sliding vane compressors suffer from high frictional losses. If you are looking for a more efficient rotary compressor, this is the best option. While sliding vane compressors have been in the spotlight for over a century, they are still quite young.
These compressors are easy to install and maintain. They are also quieter than piston compressors. They are also cheaper than piston-driven compressors. The energy efficiency and low price make them the perfect choice for any commercial or industrial application. If you’re looking for a small, compact compressor, the rotary vane has been proven to be the best choice for your needs. You should know that it has a long service life.
editor by czh 2022-11-27
China Good quality High Quality Electric Factory Price 45kw Motor Power Industrial Sales Low Noise Compression Screw Air Compressor near me manufacturer
Product Description
TRBD-60A forty fiveKW 7-13Bar affordable screw air compressor
Click on Right here For Much more Goods
Deciding on the Right Air Compressor For Your Home
You will find that air compressors are indispensable equipment for a selection of circumstances, like garages, house workshops, and basements. These resources can energy a range of instruments, and every single design is sized to suit the occupation at hand. Because air compressors have only 1 motor, they are lightweight, compact, and easy to handle. Using one air compressor to electrical power many instruments will also lessen the use and tear on personal components. This article will introduce some important traits to look for when deciding on the appropriate air compressor for your home.
Good displacement
A good displacement compressor applies pressure to a fluid, whilst a centrifugal one particular does the reverse. A optimistic displacement compressor produces the sought after force by trapping air and rising its quantity. Its discharge valve releases the higher-stress gasoline. These compressors are used in industrial purposes and nuclear electrical power plants. The difference among a good and adverse displacement compressor is that a good displacement compressor can compress and launch air at a constant fee.
A good displacement air compressor uses a reciprocating piston to compress air. This reduces the volume of the air in the compression chamber, and a discharge valve opens when the strain reaches the sought after level. These compressors are employed in bicycle pumps and other pneumatic instruments. Good displacement air compressors have several inlet ports and have a number of configurations. Optimistic displacement air compressors have a one-acting and double-acting piston, and can be oil-lubricated or oil-free of charge.
A optimistic displacement air compressor is distinct from a dynamic compressor. It draws air into the compression chambers and then releases the force when the valve is opened. Constructive displacement compressors are frequent in industrial purposes and are offered in solitary-performing, double-performing, and oil-lubricated types. Big piston compressors have ventilated intermediate pieces and crossheads on gudgeon pins. Scaled-down models have forever sealed crankcases with bearings.
Oil-cost-free
Oil-free air compressors have some benefits more than their oil-lubricated counterparts. They do not require lubrication oil simply because they are coated with Teflon. The materials has a single of the lowest coefficients of friction and is layered, so it slides past other levels with little effort. Since of this, oil-free compressors are inclined to be less costly and nonetheless deliver similar functionality. Oil-free of charge compressors are a great selection for industrial apps.
The lifestyle of an oil-free of charge air compressor is drastically more time than an oil-lubricated counterpart. These designs can function up to 2,000 hrs, four instances for a longer time than the typical oil-lubed compressor. Oil-totally free compressors also have a drastically reduce operating sound than their oil-lubricated counterparts. And simply because they never require oil adjustments, they are quieter. Some even previous up to 2,000 several hours.
An oil-cost-free air compressor is a great option if your software calls for high stages of purity. A number of applications need extremely-pure air, and even a drop of oil can result in product spoilage or harm to creation gear. In addition to the well being pitfalls, an oil-free of charge air compressor minimizes the costs related with oil contamination and minimizes leaks. It also eradicates the want for oil collection, disposal, and treatment.
A standard oil-free of charge air compressor is quite effective, demanding only about 18% of the full load horsepower. However, oil-free compressors have a greater risk of premature failure and are not advisable for big-scale industrial purposes. They could also use up to 18% of the compressor’s complete potential. They could sound attractive, but you need to make positive you recognize the benefits of an oil-free of charge air compressor before picking a single for your industrial purposes.
Solitary-phase
A solitary-phase air compressor is designed to supply the electrical power for a single pneumatic resource or system. These equipment are typically more compact than two-phase compressors and create significantly less heat and energy. These equipment are not designed for heavy-responsibility industries, but they are nonetheless highly efficient for a selection of apps, like car shops, gasoline stations, and numerous production crops. They can also be used in borewells, as they are ideal for modest areas with minimal air stream requirements.
A single-stage air compressor has a single cylinder and two valves – the inlet and the delivery valves. Equally of these valves perform mechanically, with the inlet valve managing torque and the delivery one controlling air force. Normally, single-phase compressors are powered by a gasoline motor, but there are also electric powered versions accessible. The single-phase air compressor is the most widespread kind of air compressor. It has a single cylinder, 1 piston, and a single air cylinder.
The one-phase air compressors are utilised for tiny assignments or individual use. A two-stage air compressor is far more successful for industrial projects. Its for a longer time air conclude daily life makes it a lot more effective. It is also a lot more successful for use in the automotive business, exactly where the motor has many cylinders. In basic, single-stage compressors demand a increased electricity level. The single-stage model is ideal for tiny projects, while a two-stage 1 is ideal for more substantial-scale arsenals.
CFM
The cubic foot-for every-moment (CFM) of an air compressor is the output of the device. In order to compute the CFM level, commence by seeking at the compressor’s technical specs. You need to know how a lot of cubic feet the unit can keep and how several lbs for each square inch it can compress. After you have these data, you can compute the CFM. Now you can use these numbers to choose an suitable air compressor for your wants.
The most frequent way to boost the CFM of an air compressor is to change the regulator down. By turning the dial down, the air compressor will produce a lot more than ten CFM. You can also attempt connecting two output valves. Make confident that the configurations are altered appropriately just before you commence. This will ensure that your air compressor is operating at its optimum performance and lifespan. To improve the CFM of your air compressor, 1st verify that your regulator is calibrated for the sought after stress level.
To compute the CFM of an air compressor, 1st establish the tank quantity of the equipment. Then, multiply this volume by the time it requires to fill the tank. Then, divide the consequence by sixty seconds to determine the CFM. As soon as you know how a lot air your device can keep, you can select a suited air compressor. If you happen to be working in a confined area, you ought to acquire a tool with a huge tank.
PSI
The PSI of an air compressor is the force that it can output. A standard air compressor has a gauge related to the airline at the bottom, subsequent to it, or amongst the two. The gauge tells the actual pressure of the air compressor, although the lower-out strain is established by the company. The company recommends that you set the lower-out strain 20 to forty PSI increased than the factory suggested strain. If you want to established the force for your nail gun, you can use the cut-in and minimize-out pressures on your compressor, and the tank is not going to exceed this assortment.
The PSI of an air compressor actions the force that it can produce, which is often in lbs for each square inch. For most air instruments, you need to have at the very least forty to 90 psi. In basic, reciprocating air compressors function on an on/off basis. This romantic relationship is known as the responsibility cycle. All air compressors are rated for a specific responsibility cycle, these kinds of as fifty p.c on and 20-five p.c off.
The Psig of an air compressor is not free, as a lot of individuals feel. The PSI of an air compressor is not cost-free, but it is vital to sustain it for risk-free functions. If you might be getting difficulty preserving a regular stress, take into account turning down the PSI of your compressor by 2 psig. This will figure out the vital pressure for the device. You are going to also increase the volume of energy in the program by one particular %.
Electricity resource
The energy source for an air compressor is essential in its procedure. Without the right voltage and amperage, air compressors will not perform properly. The power supply have to be shut to the compressor so that it can plug into an electrical outlet. If it is too considerably from the outlet, the compressor might not be ready to construct enough stress. When this occurs, the fuse inside the air compressor will turn off to defend the consumer. The power source should be a risk-free length from the compressor.
Most makers do not specify the energy resource for an air compressor. Relying on the horsepower, the compressor will demand approximately four amps of electrical power. A one particular-horsepower compressor would draw about twelve amps. If it had been powered by a normal a hundred and twenty-volt family offer, its motor would exceed the fifteen-amp breaker capability. A greater air compressor, however, will require a independent 15-amp power source, generating it extremely hard to use it with this type of energy supply.
The power source for an air compressor is typically electrical alternating existing (AC) that is equivalent to the voltage on a standard wall outlet. A 3-stage air compressor, on the other hand, demands a specific AC source with a few electrical offset pulses. Regardless of the type of air compressor, the electricity supply must be suitable with the incoming energy services. One particular of the most typical difficulties when attempting to connect an air compressor to an AC electrical power resource is undersized wire. This outcomes in reduced voltage and substantial amperes, tripping of more than-load relays and blown fuses.
China Best Sales CZPT Saving AC Power Rotary Screw Air Compressor near me manufacturer
Product Description
Power Preserving ac power rotary screw Air Compressor
Two stage compression rewards:
1. The intaking air circulation following compressed by the very first phase compression, connected with massive quantity oil mist and then cooling quick, and then goes into the second phase compression system, and compressed to discharge.
2. Undertake internal spray oil cooling sort, permit air isothermal compression, saving CZPT by 8%.
three. Every single phase compression ratio is as low as 3:1, tiny inner leakage, bettering efficiency by15%.
4. Operating dependable, lower noise, lengthy use lifestyle.
5. Have fastened frequency type (TKL) and permanent magnetic frequency conversion sort (TKLYC).
Advantages of the entire air compressor:
one. Approved by ISO9001certificate, SGS, CE and and so forth..
2. Undertake planet CZPT model of twin-screw principal machine imported from German, large performance, reliable and lengthy use existence.
3. Undertake entire world CZPT model of air ingestion filter, oil filter, air and oil separator, recognize substantial CZPT accuracy, compressed air oil content under 3ppm, reach to intercontinental advanced standard degree.
4. Equip with the most sophisticated air manage program. Adopt air consumption valve, intelligent handle system and pressure sensor merged manage strategy, can function by ON and OFF 2 position, stepless air ability management technique, time-hold off quit and automatically start device 3 air capability control strategy, can meet various consumers demand from customers.
5. Smart microcomputer control program, Chinese and English language procedure interface, malfunction exhibit, alarm and machine stop immediately.
six. Undertake substantial quality and entire world CZPT model of main components like British isles APD filter, The united states AMOT temperature controlling valve, SCHNEIDER electric powered components and and so forth., large performance, dependable and extended use life.
Technological parameter of 2 phase air compressor (TKLYC sort):
Our manufacturing facility and workshop:
Right after product sales provider:
1. Supplying specialist air compression software planning for free.
2. Providing our factory original equipment components at cheapest price following machine income.
three. Offering instruction and advice for free of charge, buyers can deliver their workers to our manufacturing unit to find out how to run the equipment.
four. Warranty interval: the screw major device is 1 year, the bearing is 1 calendar year, the put on areas of air ingestion valve, electric powered elements, electromagnetic valve, charge valve are 6 months
five. The air filter, oil filter, oil-water separator, lubricating oil, rubber elements and etc. are not integrated in warranty variety.
Certification and patents of our air compressor
FAQ:
Q1: Are you manufacturing unit or trade company?
A1: We are manufacturing unit.
Q2: Warranty terms of your device?
A2: One calendar year guarantee for the equipment and complex support in accordance to your demands.
Q3: Will you provide some spare parts of the machines?
A3: Yes, of program.
This fall: How extended will you take to set up generation?
A4: 380V 50HZ we can supply the products within twenty times. Other electrical power or other colour we will shipping in thirty times.
Q5: Can you take OEM orders?
A5: Yes, with professional design team, OEM orders are highly welcome!
How to Mend and Sustain an Air Compressor
A compressor is a device used to move air from 1 location to one more. Air enters the air compressor through the consumption valve. Inside the compressor, the vanes on the interior rotor rotate inside of an eccentric cavity. The self-adjusting length arm divides the area into multiple cavities of diverse measurements. As the rotor rotates, air fills the cavity. As air flows around the cavity, it builds force and is squeezed out of the compressor output.
Good displacement
Positive displacement air compressors use reciprocating pistons to compress air. Gas is drawn in in the course of the suction stroke and compressed by transferring the piston in the opposite direction. It then discharges the compressed air by relocating it in the opposite path. This sort of air compressor is most commonly found in vehicles, fridges, and other purposes that call for higher strain. Even so, it is not as efficient as a centrifugal compressor.
Most modern day air compressors use positive displacement. Optimistic displacement types seize a volume of air in the compression chamber and distribute it when the pump is working at optimum potential. They are a lot more affordable than their damaging displacement counterparts. Reciprocating screw air compressors are the most common constructive displacement compressors. The reciprocating screw air compressor adopts a drinking water jacket all around the cylinder and is usually utilised in processes this kind of as oil drilling.
A bicycle pump is an case in point of optimistic displacement compression. Air is drawn into the cylinder and compressed by the transferring piston. A piston compressor operates on the exact same basic principle, but it uses a rotating crankshaft or connecting rod to full the movement of the pistons. There are two varieties of positive displacement compressors: solitary-performing and double-acting. Equally varieties work on the exact same principle, equally are optimistic displacement compressors. The big difference between the two kinds is the strain ratio.
In air compression, optimistic displacement compression lowers the volume of the fluid and minimizes its viscosity. This final results in larger strain ratios and is utilised in centrifugal, axial, and scroll compressors. Optimistic displacement is a typical feature of most air compressors. Constructive displacement compressors offer you the same benefits and are a lot more vitality-productive when utilized to oil-free of charge and gasoline apps. This sort of compression is normally the best option for minimal-stress purposes.
oil free
If you might be seeking for an air compressor for your organization, think about an oil-free of charge air compressor. These types supply cleaner, quieter procedure than classic air compressors and demand considerably less routine maintenance. They also fulfill ISO Class or Class 1 air purity specifications. Oil-free of charge air compressors are also quieter, with less shifting elements and less noise. These rewards make oil-totally free air compressors an perfect resolution for several business purposes.
Air purity is vital in numerous industries. Even the tiniest fall of oil can hurt manufacturing products or harm items. The very best way to uncover an oil-cost-free air compressor for your enterprise is to think about the procedure and end merchandise. As air good quality increases, much more and a lot more firms are turning to oil-cost-free compressors. Some of the rewards and down sides of these air compressors are:
When deciding on an oil-totally free air compressor, it is essential to comprehend the terminology utilized in the industry. Being aware of these terms will make it less difficult for you to choose the appropriate compressor for your needs. ACTFM, or actual cubic toes for every moment, is an market time period for measuring the sum of air pumped in one particular moment underneath rated situations. Even though a easy number, it can be really beneficial in identifying which variety of air compressor is very best for your software.
The ISO 8573-1 international standard defines air quality and offers air purity classifications. The strictest classification is air purity course . Numerous producers claim that oil-free air compressors meet up with this normal. Even so, a class oil-totally free air compressor does not always suggest that the air is totally free of contaminants. In truth, Course is the benchmark for air purity. Whilst zero air quality is the optimum amount, that doesn’t suggest it really is fully oil-free of charge.
double acting
A double-performing air compressor is a device that employs compressed air to produce electric power. Its working principle is based mostly on piston and connecting rod. The connecting rod connects the crankshaft to the piston by way of pins and caps. The piston moves as the piston moves. Rods are normally created of solid carbon steel. In phrases of support and upkeep, double-acting compressors need regular vise upkeep and appropriate cleaning.
The displacement of the compressor is a measure of the displacement that the piston can create in a certain interval of time. Displacement is typically expressed in genuine cubic ft for each minute. The specific calculation relies upon on the sort of cylinder and the configuration of the compressor. Solitary-acting cylinders can have head-stop or crank-end displacement, each of which can be calculated employing the displacement equation. A double-acting air compressor will use this equation. 4 and 6 estimate the displacement.
Double-acting air compressors have several cylinders and are made of solid iron. They are drinking water-cooled and have a mechanical relationship in between the piston and connecting rod. A double-acting compressor compresses air twice for each revolution of the motor. A single cylinder moves up, whilst the other cylinder moves down. The piston moves down, making it possible for air to enter by means of valve #1. For the duration of the procedure of the compressor, the temperature of the air and gasoline boosts.
Double-acting air compressors normally have substantial strain and are deemed workhorses. Double-performing compressors also characteristic intercooling and double compression. As a consequence, these machines are inclined to final more time than single-performing compressors. Its minimal speed and twin compression make it a workhorse in the compressor business. Double-acting air compressors are workhorses and functional devices.
gasoline tank stress change
You can alter the pressure in the air compressor tank by changing the differential strain. You can switch the mainspring clockwise or counterclockwise to increase or decrease the force. This valve will open when the pressure is low enough to begin the compressor. If the strain is also low, the valve ought to be closed. The reduce-in and reduce-out pressures need to be set to acceptable values. After changing the tank force, examine the hysteresis of the tank strain swap and set the desired shutoff stress.
If the force in the tank falls underneath the cut-in amount, the tank pressure change need to be changed. You can check the change with a multimeter. Make confident the switch is not damaged. If you are unable to locate the swap, you can look at the other sections. If you locate any damaged or lacking elements, you ought to substitute them. Or else, it might be time to check the tank stress swap. You might need to disassemble the compressor and remove the swap.
The gasoline tank pressure switch is an crucial portion of the air compressor. It retains you informed of the amount of air sent by the compressor. If your tank or tank is damaged, your readings will be incorrect. If the pressure change is broken, it will not operate appropriately and outcome in incorrect readings. Fortunately, there are some easy ways to correct this. To avoid this from happening, maintain the tank stress swap in good issue.
When the air pressure in the tank drops to the minimize-in strain setting, the swap permits electrical power to movement through it. This will commence the motor and pump of the air compressor. Then, if the strain in the tank rises above the lower-off degree, the switch will journey and quit the compressor. This will prevent it from being above-pressurized. Electrical power circulation will carry on to stream to the motor. Depending on your compressor design, you can modify the minimize-in and lower-out pressures as required.
power supply
The energy provide of the air compressor is quite essential. Most air compressors run on 12 VDC, which is perfect for automotive use. Alternatively, you can buy a switching energy offer for about $20. No subject which power offer you select, you have to make certain that it can support the highest recent of the compressor. You can discover electrical power materials in all measurements, from quarter-horsepower to five-horsepower.
The voltage required for a 3-section air compressor will vary. 3-phase air compressors demand a few independent energy cords and a 3-section electrical service panel. This is simply because a regular 120/240-volt electrical provider panel is not adequate to electrical power a 3-section compressor. Furthermore, a few-phase compressors call for 3 different isolated wires for the motor and motor circuits. Three-section compressors do not demand a neutral wire.
China Custom Factory Price Sales 7 Bar Screw Air Compressor with Air Filter near me manufacturer
Item Description
Products Description
SCR EPM/EPM2 series compressors is designed to assist buyer help save a lot more CZPT and decrease procedure expense.
The air potential is 16.3m3/min@7bar,16m3/min@8bar, The overall performance is accredited by SGS.
Benefits:
one. China-Japan most current technological innovation cooperation, large reliability.
2. Oil Cooling Permanent Magnetic Motor.
3. IP65 defense quality & heavy obligation air filter, appropriate for substantial dusty atmosphere.
four. IE4 Performance motor efficiency.
5. Most CZPT preserving manner, Only operate at loading.
six. Extensive frequency assortment twenty five%-one hundred%.
7. Quality Magnetic material resist much more than a hundred and eighty temp.
eight. Reputable PM motor provider from Italy.
nine. Immediate Taper link, no transmission power loss, straightforward routine maintenance.
ten.Touch Screen PLC with preset running timetable, a lot more clever manage.
eleven. Each major motor and enthusiast motor are inverter manage, more exact control.
12. Easy for installation and service.
13. Amazing CZPT Conserving, conserve up to much more than 30-forty%.
Particulars Photos
Large Quality PM MOTOR
The motor winding just take use of new technology vacuum expoxy potting method, it boost the thermal conducivity and motor insulation security
PM MOTOR COOLING
Liquid Cooling, IP65 PM Motor. Indepent cooling system.
SCR hefty duty air filter
Most current Contact Monitor PLC
* 7″ Inch touch screen show.
* Total characteristic protection.
* Multi clever handle, like managing plan.
* Assistance Modbus RTU.
* Distant checking is alternative
Latest V/F Inverter
* Newest V/F technologies Inverter.
* CE/UL Certificed Inverter.
* Both Motor are inverter manage.
* Large dependable inverter brand name proofed in the industry.
* Professional provider support.
* Automated airend speed alter to match your air need, assist excellent CZPT conserving
Why Choose EPM2
Overall performance COMPARISON VSD
10% greater performance examine with traditional compressor.
Performance COMPARISON Mounted Speed
Certificates&Packing
Company Profile
Exhibition
FAQ
1 What trade conditions do we provide? What variety of settlement forex do we offer you?
Trade term :CIF ,CFR ,FOB,Ex-Functions As much Our company traded in Dollars ,Euros and RMB .
two How prolonged is our supply?
Our normal shipping and delivery time is thirty-forty days soon after affirmation get & getting recipets for normal compressors, for the other non normal prerequisite will be talked about scenario by case.
3 What is the voltage of the compressor?
The offered voltage consist of 380V/50HZ/3Phase, 400V/50HZ/3P, 415V/50HZ/3P, 220V/60HZ/3P, 380V/60HZ/3P, 440V/60HZ/3P. At the very same time we give other voltage according to buyer necessity.
four Can our compressor run in higher temperature environment? What is the functioning temperature selection for our equipment?
Sure ,our machine would run in large temperature atmosphere ,right up until now our goods have been bought to many countries which wouldmeet high temperature in summer season ,such like Iraq, Saudi Arabia, Egypt, Algeria, etc. Work temperature assortment :1-forty five (33.8-113)
five What is actually the min. Get requirement ?
Min. Get prerequisite is 1PCS.
The Air Compressor Is a Adaptable Resource
The Air Compressor is 1 of the most flexible instruments in any garage or workshop. It is effortless to use and can carry out a selection of duties, from jackhammering to drilling. These devices are offered in a wide variety of dimensions and sorts, creating it an exceptional selection for a assortment of conditions. With a one motor, you no lengthier want different motors for every single instrument. Its lightweight, compact layout tends to make it straightforward to manage, and the solitary motor also lowers wear on parts.
Oil-injected
Oil-injected air compressors need a big volume of lubricant, which requirements to be included to the sump often to sustain optimum functionality. As there are several varieties of industrial fluids, a nicely-intentioned upkeep technician might add the incorrect lubricant to the compressor. If this transpires, the compressor will become incompatible with the lubricant, ensuing in too much carryover and the need to flush and change downstream air treatment method factors.
Normally, the G a hundred and ten-250 oil-injected rotary screw compressor from Atlas Copco offers dependable compressed air, stopping expensive downtime. The G110-250 oil-injected rotary screw compressor is highly reputable and resilient, enabling it to operate in temperatures up to 46degC/115degF. Even with the oil-injected air compressor’s strong layout, this device requires really little on-internet site installation, and it characteristics straightforward procedure.
The major advantage of oil-injected air compressors is the reduced price of working. The price of oil-free of charge compressors is much less than half of that of oil-injected ones, and it will require less routine maintenance fees in the long run. Furthermore, the oil-free of charge technique is far more environmentally friendly than oil-injected air compressors. But the disadvantages of oil-injected air compressors are sizeable, way too. It can contaminate finished products and cause a substantial fiscal threat for the maker.
An oil-injected rotary screw air compressor gives a number of advantages more than its counterpart. Very first, it functions an innovative vertical style with variable-velocity generate, making it possible for it to run a lot more efficiently. Second, oil-injected air compressors minimize power intake by up to fifty% in contrast to non-oil-injected air compressors. They also have a thermostatic valve, making it possible for them to preserve an ideal temperature. Thermostatically-regulated oil coolers enable the compressor to run a lot more quietly.
Oil-free
What is an oil-cost-free air compressor? The identify refers to a sort of air compressor that does not have oil in the compressor chamber. Oil-totally free air compressors nevertheless use oil for a variety of reasons, including lubricating the moving parts and taking care of waste heat. However, a lot of men and women do not understand that their air compressor nevertheless calls for oil for correct functioning. This article will discover why this kind of air compressor is preferable for numerous customers.
1st of all, oil-totally free air technology has a lot of benefits. For one particular, it minimizes the energy cost concerned in filtering air, and it minimizes leaks. Additionally, it also lowers the oil fees connected with compressor refills. And finally, it minimizes the risks of contamination. Oil-free air technology is the foreseeable future of compressed air. If you happen to be looking for an oil-totally free air compressor, here is what to seem for in your lookup.
Based on the goal of your air compressor, it might be beneficial to spend in an oil-free of charge air compressor. Oil-lubricated air compressors are typically far more sturdy than their oil-free counterparts, but they might price 2 times as significantly. You must still think about the value of ownership prior to purchasing an oil-totally free compressor. The oil-cost-free designs can be less difficult to transport, and they are more potent. In addition, they’re quieter than oil-lubed types.
An oil-cost-free air compressor also signifies significantly less upkeep, as it will not need oil to function. This kind of air compressors also functions fewer shifting components, which implies less places for issues to produce. All oil-free of charge air compressors are manufactured to meet ISO Class and 1 air purity expectations. They also have less sound and vibration compared to their oil-primarily based counterparts. So, why not select an oil-free of charge air compressor for your enterprise?
Gasoline
When choosing a gasoline-driven air compressor, it truly is critical to take into account the rewards of gasoline. This energy resource can electricity a huge air compressor with out electrical power. Nonetheless, this sort of air compressor lacks electrical hookup, so you may need to have to operate an extension cord if you want to use it at a distance. Even so, gas compressors are ready to purpose with just a fuel tank. This helps make them ideal for medium to large-duty industrial programs.
Another important thought when deciding on a fuel air compressor is its measurement. More substantial compressors are normally more substantial than transportable ones and require far more space. This can make them less difficult to transport and work on the go. Nevertheless, if you’re not positive which type of air compressor is very best for you, consider the gas-driven variations. Even though they may be lighter, they don’t operate as effortlessly as their electric counterparts. Gasoline-run compressors are not as portable as their electric powered counterparts and demand correct servicing.
Electrical energy
Electric power in an air compressor is not low cost. A 25 HP air compressor operates for ten hrs each and every day, 5 times a 7 days. The motor in these equipment consumes 746 watts per hour. To find out how a lot electrical power the gear uses, multiply the wattage by the operating time. For illustration, if the compressor operates for a few hours, then it will use 1.9 kilowatt hours of electric power. To figure out how much electrical energy an air compressor utilizes for each working day, you can determine the kilowatt several hours and multiply the quantity by the utility rate. Contemplating this, you can figure out the price of operating your air compressor when for each month.
The price of functioning an air compressor depends on the sort of compressor. Electric air compressors are often silent and can operate without any servicing. These resources can be still left unattended for up to 4 thousand hrs prior to requiring fix. Electric powered air compressors require increased power for larger strain, so you must prepare appropriately. Regardless of whether or not you need a upkeep check out is up to you, but the reward of not getting to spend a fortune on repairs is priceless.
Although compressed air is not an power-productive supply, its use in a assortment of purposes may possibly conserve you funds and kilowatts. Since an air compressor utilizes power when it is working, the expense is reduced than the price of operating a power tool. If you program to use your air compressor for a long time, make sure that it is preserved properly. Proper treatment will preserve you money and electrical power, and you could even be in a position to get an prolonged guarantee if the compressor breaks down.
Variable frequency generate
The main purpose of a variable frequency push (VFD) in an air compressor is to reduce strength use in the procedure of compression. A one motor drag system are not able to alter its pace continually according to the fat of the load. By implementing frequency control to the compressor, the power intake can be diminished even though sustaining the very same force degree. Consequently, a VFD is an superb choice for compressors. Its advantages are quite a few.
A VFD can also monitor the temperature of the motor and send mistake signals if the motor is running as well very hot or way too chilly. This eradicates the need for a different sensor to monitor the oil stress. These functions are valuable not only in reducing strength intake, but also in improving the functionality of an software. Additionally, a VFD can check extra variables this kind of as temperature and motor speed. Therefore, it is a helpful expense.
When making use of a VFD, it is crucial to decide on the proper motor. The speed of the compressor ought to be inside the highest starting up restrict of the motor. The air tank may possibly be of any dimensions, but a consistent force limit is required to preserve the VFD working within the services issue of the motor. In addition to a VFD, a grasp controller ought to also consist of a distant pressure set position and a PID card for a master controller. The transmitter must incorporate all beneficial information from the VFD, such as the speed and the oil temperature. The VFD need to be analyzed prior to it is built-in with the grasp control. It need to be tested for min and max velocity, temperature, and current within the expected range.
The use of a VFD in an air compressor has many positive aspects. One of the most notable is the reduction in energy intake. Set-speed compressors operate on set details of 6 to seven bar. An added bar of compression uses 7 per cent of energy. This strength is squandered. A VFD-driven air compressor can also enhance the lifestyle span of compressor areas. It is 1 of the best investments in your compressor. So, why wait around any for a longer time?
China Good quality High Efficiency Direct CZPT Drive Oil Less Rotary Double Screw Air Compressor (37KW-315KW) near me manufacturer
Merchandise Description
Higher Effectiveness Direct CZPT Push Oil considerably less Rotary Double Screw Air Compressor (37KW-315KW)
Features:
Complex paramater:
packing:
Certificate:
application:
Manufacturing facility:
FAQ:
Q1: Are you manufacturing facility or trade business?
A1: We are manufacturing facility.
Q2: What the just deal with of your manufacturing unit?
A2: Our firm is found in the West of the cross of Yijing highway and Siwei highway, Xihu (West Lake) Dis.li Economic Advancement Area, ZheJiang , 300300, China
Q3: Warranty terms of your machine?
A3: A single year for whole equipment 2 yr for air conclude , and technical assist according to your wants.
This fall: Will you give some spare areas of the machines?
A4: Yes, of system.we have our own spare areas companys
Q5: What about solution deal?
A5: We pack our products strictly with common seaworthy situation.
Q6: What about the voltage of products?
A6: voltage can be customized in accordance to your equirement.
Q7: Which payment expression can you settle for?
A7: TT or LC
Q8: How extended will you just take to organize production?
A8: 380V 50HZ we can delivery the merchandise in 7-fifteen times. Other electrical energy or other color we will shipping inside fifteen-twenty times.
Q9: Can you take OEM orders?
A9: Of course, with specialist layout crew, OEM orders are very welcome.
Q10: Which trade term can you accept?
A10: Accessible trade terms: FOB, CIF, CFR, EXW, CPT, etc.
seven. Our Support
7.1 After-sale Services
• Any questions or requests before, throughout or right after sales, we would like to support you any time and will discover you the very best answer in 24 several hours.
• Guarantee: One year for the entire equipment 2 calendar year for air finish , and spare components will be provided with greatest price.
• In excess of board engineer support is obtainable.
7.2 Specific Custom-made Service
1) Total OEM
• Quantity: at least 5 pcs
• In this strategy, we will do all the changes (Coloration, name plate and logo) as your need to have, and will not charge extra payment.
2) Half OEM
• Amount: no limit
• Beneath this plan, we can make the required alteration (title plate and emblem) but we will cost some further charge for the identify plate, as the identify plate manufacturing unit has the MOQ.
3) Logo OEM
• Amount: no restrict
• Only the brand will be changed to yours, and no additional payment will be charged.
seven.3 Overseas Engineer Support
• We are accessible to deliver our engineer for aboard services. Only need to have you to organize the lodging, transportation and translator. Additional cost for every single will be discussed primarily based on regional price degree.
8. Contact:
How to Pick the Correct Air Compressor
An air compressor employs pressurized air to electrical power a variety of instruments. They are most generally employed to electrical power nailers and influence wrenches. Other well-liked makes use of for air compressors incorporate paint sprayers and impact wrenches. Whilst all air compressors have the exact same fundamental building, their specialty differs. Ultimately, their differences arrive down to the amount of air they can thrust. Go through on for data on every single kind of air compressor. These equipment are great for a lot of distinct purposes, and choosing the appropriate air compressor is dependent on your certain wants.
Electric motor
Whilst buying an electric motor for air compressor, compatibility is a key factor. Not all motors operate with the very same kind of air compressor, so it’s critical to verify the manufacturer’s recommendations just before acquiring. By doing this, you can avoid throwing away funds on an incompatible motor. Another important thought is velocity. A motor’s pace is its price of rotation, measured in revolutions for each moment. It is vital that you obtain a motor with adequate velocity to meet the demands of your air compressor.
Usually, an electric motor for air compressor is 1.5 hp. It is ideal for use with medical equipment and metal-reducing equipment. It also performs well beneath continuous operation and offers a higher performance and power-saving performance. Additionally, it features an attractive cost, making it a good choice for a broad range of applications. If you are hunting for a motor for an air compressor, appear no even more than a ZYS sequence.
A motor’s protection class suggests how the motor will work. Protection courses are specified by the IEC 60034-5. These are mentioned with two digits and represent the defense towards strong objects and water. For example, an IP23 score indicates that the motor will be secured from reliable objects, while IP54 implies that it will protect from dust and h2o sprayed from all directions. It is essential to select a motor with the right safety class for your air compressor.
When deciding on an electrical motor, you ought to take into account whether or not it truly is appropriate with the model of air compressor. Some may be appropriate, even though other folks may possibly demand advanced electronics expertise to restore. Even so, most air compressors are coated by warranty, so it truly is essential to check out with the manufacturer if the warranty is nevertheless in effect ahead of you commit a dime on a substitute. The motor need to be replaced if it has unsuccessful to carry out as made.
Oil bath
Air compressors demand proper lubrication to operate proficiently. The piston must attract air with nominal friction. Dependent on their design, air compressors can possibly be oil-lubricated or oil-free. The former utilizes oil to reduce piston friction, even though the latter splashes it on the cylinder bearings and walls. These kinds of air compressors are generally acknowledged as oil-flooded air compressors. In get to preserve their oil baths clean, they are advised for use in spots with high dust levels.
Commence/cease manage
An air compressor can be managed by a start/stop manage. This kind of handle sends a signal to the main motor that activates the compressor when the demand from customers for air falls below a preset limit. This manage strategy is successful for scaled-down air compressors and can be useful for lowering energy expenses. Start/cease management is most powerful in programs exactly where air pressure does not adjust regularly and in which the compressor is not needed to run continually.
To troubleshoot this problem, you need to verify the electrical power offer of your compressor. To check out the source aspect, use a voltage keep track of to decide if electrical power is flowing to the compressor. Ensure that the energy supply to the compressor is steady and steady at all occasions. If it fluctuates, the compressor might not start or stop as envisioned. If you can’t discover the issue with the air compressor electrical power offer, it may be time to substitute it.
In addition to the start/stop manage, you may want to purchase further air receivers for your air compressor. These can increase the potential of air stored and lessen the variety of times it begins and stops. One more way to lessen the quantity of starts for each hour is to add much more air receivers. Then, you can modify the management to match your demands. You can also set up a force gauge that screens the compressor’s efficiency.
Start off/stop control for air compressors can be complicated, but the standard parts are relatively straightforward to understand. One particular way to check them is to change the compressor on or off. It is generally located on the exterior of the motor. If you might be doubtful of the spot of these elements, check the capacitors and make certain that the air compressor is not running even though you happen to be not using it. If it does, attempt to take away the capacitor.
Variable displacement management is another way to adjust the amount of air flowing into the compressor. By controlling the volume of air, the management can delay the use of further compressors until finally much more needed air is obtainable. In addition to this, the gadget can also keep track of the energy utilized in the compressor. This management technique can end result in significant power cost savings. You can even conserve on the amount of electrical power by making use of variable displacement handle. It is essential for efficient compressed air methods.
Variable velocity travel
A VFD, or variable frequency push, is a kind of electric motor that adjusts its velocity to match the desire for air. It is an efficient way to lessen vitality fees and enhance program trustworthiness. In fact, scientific studies have revealed that a 20% reduction in motor pace can preserve up to fifty% of vitality. In addition, a VFD can check additional variables such as compressor oil pressure and motor temperature. By reducing handbook checks, a VFD will increase the performance of the software and reduce running fees.
In addition to decreasing vitality fees, variable-speed drives also boost productivity. A variable-speed air compressor decreases the chance of method leaks by thirty per cent. It also reduces the chance of program leaks by reducing pressure in the program. Simply because of these positive aspects, several governments are promoting this technology in their industries. Many even offer you incentives to support companies update to variable-pace drives. Consequently, the variable-velocity generate can advantage several air compressor installations.
One main gain of a variable-speed generate is its potential to optimize strength use. Variable frequency drives are capable to ramp up and down to match the demand for air. The goal is to improve the force and movement in the technique so that the greatest “useless band” happens among forty % and eighty per cent of entire load. A variable-speed compressor will also boost power effectiveness because of its programmability.
A variable-velocity air compressor can also be used to handle the sum of air that is compressed by the technique. This function adjusts the frequency of energy equipped to the motor primarily based on the need. If the demand from customers for air is minimal, the frequency of the motor will minimize to conserve power. On the other hand, if there is an excess desire for air, the variable-speed compressor will enhance its pace. In addition, this variety of air compressor is much more efficient than its fastened-pace counterpart.
A VFD has several benefits for compressed air techniques. 1st, it assists stabilize the pressure in the pipe community, thereby reducing the electricity losses owing to upstream pressure. It also assists lessen the energy usage triggered by fluctuations in upward pressure. Its benefits are also significantly-achieving. And as extended as the air force and air offer is properly sized, a VFD will support enhance the efficiency of compressed air programs.